0 0x00000000 The operation completed successfully. 1 0x00000001 Incorrect function. 2 0x00000002 The system cannot find the file specified. 3 0x00000003 The system cannot find the path specified. 4 0x00000004 The system cannot open the file. 5 0x00000005 Access is denied. 6 0x00000006 The handle is invalid. 7 0x00000007 The storage control blocks were destroyed. 8 0x00000008 Not enough storage is available to process this command. 9 0x00000009 The storage control block address is invalid. 10 0x0000000A The environment is incorrect. 11 0x0000000B An attempt was made to load a program with an incorrect format. 12 0x0000000C The access code is invalid. 13 0x0000000D The data is invalid. 14 0x0000000E Not enough storage is available to complete this operation. 15 0x0000000F The system cannot find the drive specified. 16 0x00000010 The directory cannot be removed. 17 0x00000011 The system cannot move the file to a different disk drive. 18 0x00000012 There are no more files. 19 0x00000013 The media is write protected. 20 0x00000014 The system cannot find the device specified. 21 0x00000015 The device is not ready. 22 0x00000016 The device does not recognize the command. 23 0x00000017 Data error (cyclic redundancy check) 24 0x00000018 The program issued a command but the command length is incorrect. 25 0x00000019 The drive cannot locate a specific area or track on the disk. 26 0x0000001A The specified disk or diskette cannot be accessed. 27 0x0000001B The drive cannot find the sector requested. 28 0x0000001C The printer is out of paper. 29 0x0000001D The system cannot write to the specified device. 30 0x0000001E The system cannot read from the specified device. 31 0x0000001F A device attached to the system is not functioning. 32 0x00000020 The process cannot access the file because it is being used by another process. 33 0x00000021 The process cannot access the file because another process has locked a portion of the file. 34 0x00000022 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. 36 0x00000024 Too many files opened for sharing. 38 0x00000026 Reached end of file. 39 0x00000027 The disk is full. 50 0x00000032 The network request is not supported. 51 0x00000033 The remote computer is not available. 52 0x00000034 A duplicate name exists on the network. 53 0x00000035 The network path was not found. 54 0x00000036 The network is busy. 55 0x00000037 The specified network resource or device is no longer available. 56 0x00000038 The network BIOS command limit has been reached. 57 0x00000039 A network adapter hardware error occurred. 58 0x0000003A The specified server cannot perform the requested operation. 59 0x0000003B An unexpected network error occurred. 60 0x0000003C The remote adapter is not compatible. 61 0x0000003D The printer queue is full. 62 0x0000003E Space to store the file waiting to be printed is not available on the server. 63 0x0000003F Your file waiting to be printed was deleted. 64 0x00000040 The specified network name is no longer available. 65 0x00000041 Network access is denied. 66 0x00000042 The network resource type is not correct. 67 0x00000043 The network name cannot be found. 68 0x00000044 The name limit for the local computer network adapter card was exceeded. 69 0x00000045 The network BIOS session limit was exceeded. 70 0x00000046 The remote server has been paused or is in the process of being started. 71 0x00000047 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. 72 0x00000048 The specified printer or disk device has been paused. 80 0x00000050 The file exists. 82 0x00000052 The directory or file cannot be created. 83 0x00000053 Fail on INT 24 84 0x00000054 Storage to process this request is not available. 85 0x00000055 The local device name is already in use. 86 0x00000056 The specified network password is not correct. 87 0x00000057 The parameter is incorrect. 88 0x00000058 A write fault occurred on the network. 89 0x00000059 The system cannot start another process at this time. 100 0x00000064 Cannot create another system semaphore. 101 0x00000065 The exclusive semaphore is owned by another process. 102 0x00000066 The semaphore is set and cannot be closed. 103 0x00000067 The semaphore cannot be set again. 104 0x00000068 Cannot request exclusive semaphores at interrupt time. 105 0x00000069 The previous ownership of this semaphore has ended. 106 0x0000006A Insert the diskette for drive %1. 107 0x0000006B Program stopped because alternate diskette was not inserted. 108 0x0000006C The disk is in use or locked by another process. 109 0x0000006D The pipe has been ended. 110 0x0000006E The system cannot open the device or file specified. 111 0x0000006F The file name is too long. 112 0x00000070 There is not enough space on the disk. 113 0x00000071 No more internal file identifiers available. 114 0x00000072 The target internal file identifier is incorrect. 117 0x00000075 The IOCTL call made by the application program is not correct. 118 0x00000076 The verify-on-write switch parameter value is not correct. 119 0x00000077 The system does not support the command requested. 120 0x00000078 This function is only valid in Windows NT mode. 121 0x00000079 The semaphore timeout period has expired. 122 0x0000007A The data area passed to a system call is too small. 123 0x0000007B The filename, directory name, or volume label syntax is incorrect. 124 0x0000007C The system call level is not correct. 125 0x0000007D The disk has no volume label. 126 0x0000007E The specified module could not be found. 127 0x0000007F The specified procedure could not be found. 128 0x00000080 There are no child processes to wait for. 129 0x00000081 The %1 application cannot be run in Windows NT mode. 130 0x00000082 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. 131 0x00000083 An attempt was made to move the file pointer before the beginning of the file. 132 0x00000084 The file pointer cannot be set on the specified device or file. 133 0x00000085 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. 134 0x00000086 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. 135 0x00000087 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. 136 0x00000088 The system tried to delete the JOIN of a drive that is not joined. 137 0x00000089 The system tried to delete the substitution of a drive that is not substituted. 138 0x0000008A The system tried to join a drive to a directory on a joined drive. 139 0x0000008B The system tried to substitute a drive to a directory on a substituted drive. 140 0x0000008C The system tried to join a drive to a directory on a substituted drive. 141 0x0000008D The system tried to SUBST a drive to a directory on a joined drive. 142 0x0000008E The system cannot perform a JOIN or SUBST at this time. 143 0x0000008F The system cannot join or substitute a drive to or for a directory on the same drive. 144 0x00000090 The directory is not a subdirectory of the root directory. 145 0x00000091 The directory is not empty. 146 0x00000092 The path specified is being used in a substitute. 147 0x00000093 Not enough resources are available to process this command. 148 0x00000094 The path specified cannot be used at this time. 149 0x00000095 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. 150 0x00000096 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. 151 0x00000097 The number of specified semaphore events for DosMuxSemWait is not correct. 152 0x00000098 DosMuxSemWait did not execute; too many semaphores are already set. 153 0x00000099 The DosMuxSemWait list is not correct. 154 0x0000009A The volume label you entered exceeds the label character limit of the target file system. 155 0x0000009B Cannot create another thread. 156 0x0000009C The recipient process has refused the signal. 157 0x0000009D The segment is already discarded and cannot be locked. 158 0x0000009E The segment is already unlocked. 159 0x0000009F The address for the thread ID is not correct. 160 0x000000A0 The argument string passed to DosExecPgm is not correct. 161 0x000000A1 The specified path is invalid. 162 0x000000A2 A signal is already pending. 164 0x000000A4 No more threads can be created in the system. 167 0x000000A7 Unable to lock a region of a file. 170 0x000000AA The requested resource is in use. 173 0x000000AD A lock request was not outstanding for the supplied cancel region. 174 0x000000AE The file system does not support atomic changes to the lock type. 180 0x000000B4 The system detected a segment number that was not correct. 182 0x000000B6 The operating system cannot run %1. 183 0x000000B7 Cannot create a file when that file already exists. 186 0x000000BA The flag passed is not correct. 187 0x000000BB The specified system semaphore name was not found. 188 0x000000BC The operating system cannot run %1. 189 0x000000BD The operating system cannot run %1. 190 0x000000BE The operating system cannot run %1. 191 0x000000BF Cannot run %1 in Windows NT mode. 192 0x000000C0 The operating system cannot run %1. 193 0x000000C1 %1 is not a valid Windows NT application. 194 0x000000C2 The operating system cannot run %1. 195 0x000000C3 The operating system cannot run %1. 196 0x000000C4 The operating system cannot run this application program. 197 0x000000C5 The operating system is not presently configured to run this application. 198 0x000000C6 The operating system cannot run %1. 199 0x000000C7 The operating system cannot run this application program. 200 0x000000C8 The code segment cannot be greater than or equal to 64KB. 201 0x000000C9 The operating system cannot run %1. 202 0x000000CA The operating system cannot run %1. 203 0x000000CB The system could not find the environment option that was entered. 205 0x000000CD No process in the command subtree has a signal handler. 206 0x000000CE The filename or extension is too long. 207 0x000000CF The ring 2 stack is in use. 208 0x000000D0 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. 209 0x000000D1 The signal being posted is not correct. 210 0x000000D2 The signal handler cannot be set. 212 0x000000D4 The segment is locked and cannot be reallocated. 214 0x000000D6 Too many dynamic link modules are attached to this program or dynamic link module. 215 0x000000D7 Can't nest calls to LoadModule. 216 0x000000D8 The image file %1 is valid, but is for a machine type other than the current machine. 230 0x000000E6 The pipe state is invalid. 231 0x000000E7 All pipe instances are busy. 232 0x000000E8 The pipe is being closed. 233 0x000000E9 No process is on the other end of the pipe. 234 0x000000EA More data is available. 240 0x000000F0 The session was cancelled. 254 0x000000FE The specified extended attribute name was invalid. 255 0x000000FF The extended attributes are inconsistent. 259 0x00000103 No more data is available. 266 0x0000010A The Copy API cannot be used. 267 0x0000010B The directory name is invalid. 275 0x00000113 The extended attributes did not fit in the buffer. 276 0x00000114 The extended attribute file on the mounted file system is corrupt. 277 0x00000115 The extended attribute table file is full. 278 0x00000116 The specified extended attribute handle is invalid. 282 0x0000011A The mounted file system does not support extended attributes. 288 0x00000120 Attempt to release mutex not owned by caller. 298 0x0000012A Too many posts were made to a semaphore. 299 0x0000012B Only part of a Read/WriteProcessMemory request was completed. 317 0x0000013D The system cannot find message for message number 0x%1 in message file for %2. 487 0x000001E7 Attempt to access invalid address. 534 0x00000216 Arithmetic result exceeded 32 bits. 535 0x00000217 There is a process on other end of the pipe. 536 0x00000218 Waiting for a process to open the other end of the pipe. 994 0x000003E2 Access to the extended attribute was denied. 995 0x000003E3 The I/O operation has been aborted because of either a thread exit or an application request. 996 0x000003E4 Overlapped I/O event is not in a signalled state. 997 0x000003E5 Overlapped I/O operation is in progress. 998 0x000003E6 Invalid access to memory location. 999 0x000003E7 Error performing inpage operation. 1001 0x000003E9 Recursion too deep, stack overflowed. 1002 0x000003EA The window cannot act on the sent message. 1003 0x000003EB Cannot complete this function. 1004 0x000003EC Invalid flags. 1005 0x000003ED The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt. 1006 0x000003EE The volume for a file has been externally altered such that the opened file is no longer valid. 1007 0x000003EF The requested operation cannot be performed in full-screen mode. 1008 0x000003F0 An attempt was made to reference a token that does not exist. 1009 0x000003F1 The configuration registry database is corrupt. 1010 0x000003F2 The configuration registry key is invalid. 1011 0x000003F3 The configuration registry key could not be opened. 1012 0x000003F4 The configuration registry key could not be read. 1013 0x000003F5 The configuration registry key could not be written. 1014 0x000003F6 One of the files in the Registry database had to be recovered by use of a log or alternate copy. The recovery was successful. 1015 0x000003F7 The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt. 1016 0x000003F8 An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry. 1017 0x000003F9 The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format. 1018 0x000003FA Illegal operation attempted on a Registry key which has been marked for deletion. 1019 0x000003FB System could not allocate the required space in a Registry log. 1020 0x000003FC Cannot create a symbolic link in a Registry key that already has subkeys or values. 1021 0x000003FD Cannot create a stable subkey under a volatile parent key. 1022 0x000003FE A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. 1051 0x0000041B A stop control has been sent to a service which other running services are dependent on. 1052 0x0000041C The requested control is not valid for this service 1053 0x0000041D The service did not respond to the start or control request in a timely fashion. 1054 0x0000041E A thread could not be created for the service. 1055 0x0000041F The service database is locked. 1056 0x00000420 An instance of the service is already running. 1057 0x00000421 The account name is invalid or does not exist. 1058 0x00000422 The specified service is disabled and cannot be started. 1059 0x00000423 Circular service dependency was specified. 1060 0x00000424 The specified service does not exist as an installed service. 1061 0x00000425 The service cannot accept control messages at this time. 1062 0x00000426 The service has not been started. 1063 0x00000427 The service process could not connect to the service controller. 1064 0x00000428 An exception occurred in the service when handling the control request. 1065 0x00000429 The database specified does not exist. 1066 0x0000042A The service has returned a service-specific error code. 1067 0x0000042B The process terminated unexpectedly. 1068 0x0000042C The dependency service or group failed to start. 1069 0x0000042D The service did not start due to a logon failure. 1070 0x0000042E After starting, the service hung in a start-pending state. 1071 0x0000042F The specified service database lock is invalid. 1072 0x00000430 The specified service has been marked for deletion. 1073 0x00000431 The specified service already exists. 1074 0x00000432 The system is currently running with the last-known-good configuration. 1075 0x00000433 The dependency service does not exist or has been marked for deletion. 1076 0x00000434 The current boot has already been accepted for use as the last-known-good control set. 1077 0x00000435 No attempts to start the service have been made since the last boot. 1078 0x00000436 The name is already in use as either a service name or a service display name. 1079 0x00000437 The account specified for this service is different from the account specified for other services running in the same process. 1100 0x0000044C The physical end of the tape has been reached. 1101 0x0000044D A tape access reached a filemark. 1102 0x0000044E Beginning of tape or partition was encountered. 1103 0x0000044F A tape access reached the end of a set of files. 1104 0x00000450 No more data is on the tape. 1105 0x00000451 Tape could not be partitioned. 1106 0x00000452 When accessing a new tape of a multivolume partition, the current blocksize is incorrect. 1107 0x00000453 Tape partition information could not be found when loading a tape. 1108 0x00000454 Unable to lock the media eject mechanism. 1109 0x00000455 Unable to unload the media. 1110 0x00000456 Media in drive may have changed. 1111 0x00000457 The I/O bus was reset. 1112 0x00000458 No media in drive. 1113 0x00000459 No mapping for the Unicode character exists in the target multi-byte code page. 1114 0x0000045A A dynamic link library (DLL) initialization routine failed. 1115 0x0000045B A system shutdown is in progress. 1116 0x0000045C Unable to abort the system shutdown because no shutdown was in progress. 1117 0x0000045D The request could not be performed because of an I/O device error. 1118 0x0000045E No serial device was successfully initialized. The serial driver will unload. 1119 0x0000045F Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. 1120 0x00000460 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) 1121 0x00000461 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) 1122 0x00000462 No ID address mark was found on the floppy disk. 1123 0x00000463 Mismatch between the floppy disk sector ID field and the floppy disk controller track address. 1124 0x00000464 The floppy disk controller reported an error that is not recognized by the floppy disk driver. 1125 0x00000465 The floppy disk controller returned inconsistent results in its registers. 1126 0x00000466 While accessing the hard disk, a recalibrate operation failed, even after retries. 1127 0x00000467 While accessing the hard disk, a disk operation failed even after retries. 1128 0x00000468 While accessing the hard disk, a disk controller reset was needed, but even that failed. 1129 0x00000469 Physical end of tape encountered. 1130 0x0000046A Not enough server storage is available to process this command. 1131 0x0000046B A potential deadlock condition has been detected. 1132 0x0000046C The base address or the file offset specified does not have the proper alignment. 1140 0x00000474 An attempt to change the system power state was vetoed by another application or driver. 1141 0x00000475 The system BIOS failed an attempt to change the system power state. 1142 0x00000476 An attempt was made to create more links on a file than the file system supports. 1150 0x0000047E The specified program requires a newer version of Windows. 1151 0x0000047F The specified program is not a Windows or MS-DOS program. 1152 0x00000480 Cannot start more than one instance of the specified program. 1153 0x00000481 The specified program was written for an older version of Windows. 1154 0x00000482 One of the library files needed to run this application is damaged. 1155 0x00000483 No application is associated with the specified file for this operation. 1156 0x00000484 An error occurred in sending the command to the application. 1157 0x00000485 One of the library files needed to run this application cannot be found. 1200 0x000004B0 The specified device name is invalid. 1201 0x000004B1 The device is not currently connected but it is a remembered connection. 1202 0x000004B2 An attempt was made to remember a device that had previously been remembered. 1203 0x000004B3 No network provider accepted the given network path. 1204 0x000004B4 The specified network provider name is invalid. 1205 0x000004B5 Unable to open the network connection profile. 1206 0x000004B6 The network connection profile is corrupt. 1207 0x000004B7 Cannot enumerate a non-container. 1208 0x000004B8 An extended error has occurred. 1209 0x000004B9 The format of the specified group name is invalid. 1210 0x000004BA The format of the specified computer name is invalid. 1211 0x000004BB The format of the specified event name is invalid. 1212 0x000004BC The format of the specified domain name is invalid. 1213 0x000004BD The format of the specified service name is invalid. 1214 0x000004BE The format of the specified network name is invalid. 1215 0x000004BF The format of the specified share name is invalid. 1216 0x000004C0 The format of the specified password is invalid. 1217 0x000004C1 The format of the specified message name is invalid. 1218 0x000004C2 The format of the specified message destination is invalid. 1219 0x000004C3 The credentials supplied conflict with an existing set of credentials. 1220 0x000004C4 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. 1221 0x000004C5 The workgroup or domain name is already in use by another computer on the network. 1222 0x000004C6 The network is not present or not started. 1223 0x000004C7 The operation was cancelled by the user. 1224 0x000004C8 The requested operation cannot be performed on a file with a user mapped section open. 1225 0x000004C9 The remote system refused the network connection. 1226 0x000004CA The network connection was gracefully closed. 1227 0x000004CB The network transport endpoint already has an address associated with it. 1228 0x000004CC An address has not yet been associated with the network endpoint. 1229 0x000004CD An operation was attempted on a non-existent network connection. 1230 0x000004CE An invalid operation was attempted on an active network connection. 1231 0x000004CF The remote network is not reachable by the transport. 1232 0x000004D0 The remote system is not reachable by the transport. 1233 0x000004D1 The remote system does not support the transport protocol. 1234 0x000004D2 No service is operating at the destination network endpoint on the remote system. 1235 0x000004D3 The request was aborted. 1236 0x000004D4 The network connection was aborted by the local system. 1237 0x000004D5 The operation could not be completed. A retry should be performed. 1238 0x000004D6 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. 1239 0x000004D7 Attempting to login during an unauthorized time of day for this account. 1240 0x000004D8 The account is not authorized to login from this station. 1241 0x000004D9 The network address could not be used for the operation requested. 1242 0x000004DA The service is already registered. 1243 0x000004DB The specified service does not exist. 1244 0x000004DC The operation being requested was not performed because the user has not been authenticated. 1245 0x000004DD The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. 1246 0x000004DE Return that wants caller to continue with work in progress. 1247 0x000004DF An attempt was made to perform an initialization operation when initialization has already been completed. 1248 0x000004E0 No more local devices. 1300 0x00000514 Not all privileges referenced are assigned to the caller. 1301 0x00000515 Some mapping between account names and security IDs was not done. 1302 0x00000516 No system quota limits are specifically set for this account. 1303 0x00000517 No encryption key is available. A well-known encryption key was returned. 1304 0x00000518 The NT password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. 1305 0x00000519 The revision level is unknown. 1306 0x0000051A Indicates two revision levels are incompatible. 1307 0x0000051B This security ID may not be assigned as the owner of this object. 1308 0x0000051C This security ID may not be assigned as the primary group of an object. 1309 0x0000051D An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. 1310 0x0000051E The group may not be disabled. 1311 0x0000051F There are currently no logon servers available to service the logon request. 1312 0x00000520 A specified logon session does not exist. It may already have been terminated. 1313 0x00000521 A specified privilege does not exist. 1314 0x00000522 A required privilege is not held by the client. 1315 0x00000523 The name provided is not a properly formed account name. 1316 0x00000524 The specified user already exists. 1317 0x00000525 The specified user does not exist. 1318 0x00000526 The specified group already exists. 1319 0x00000527 The specified group does not exist. 1320 0x00000528 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. 1321 0x00000529 The specified user account is not a member of the specified group account. 1322 0x0000052A The last remaining administration account cannot be disabled or deleted. 1323 0x0000052B Unable to update the password. The value provided as the current password is incorrect. 1324 0x0000052C Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. 1325 0x0000052D Unable to update the password because a password update rule has been violated. 1326 0x0000052E Logon failure: unknown user name or bad password. 1327 0x0000052F Logon failure: user account restriction. 1328 0x00000530 Logon failure: account logon time restriction violation. 1329 0x00000531 Logon failure: user not allowed to log on to this computer. 1330 0x00000532 Logon failure: the specified account password has expired. 1331 0x00000533 Logon failure: account currently disabled. 1332 0x00000534 No mapping between account names and security IDs was done. 1333 0x00000535 Too many local user identifiers (LUIDs) were requested at one time. 1334 0x00000536 No more local user identifiers (LUIDs) are available. 1335 0x00000537 The subauthority part of a security ID is invalid for this particular use. 1336 0x00000538 The access control list (ACL) structure is invalid. 1337 0x00000539 The security ID structure is invalid. 1338 0x0000053A The security descriptor structure is invalid. 1340 0x0000053C The inherited access control list (ACL) or access control entry (ACE) could not be built. 1341 0x0000053D The server is currently disabled. 1342 0x0000053E The server is currently enabled. 1343 0x0000053F The value provided was an invalid value for an identifier authority. 1344 0x00000540 No more memory is available for security information updates. 1345 0x00000541 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. 1346 0x00000542 Either a required impersonation level was not provided, or the provided impersonation level is invalid. 1347 0x00000543 Cannot open an anonymous level security token. 1348 0x00000544 The validation information class requested was invalid. 1349 0x00000545 The type of the token is inappropriate for its attempted use. 1350 0x00000546 Unable to perform a security operation on an object which has no associated security. 1351 0x00000547 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. 1352 0x00000548 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. 1353 0x00000549 The domain was in the wrong state to perform the security operation. 1354 0x0000054A This operation is only allowed for the Primary Domain Controller of the domain. 1355 0x0000054B The specified domain did not exist. 1356 0x0000054C The specified domain already exists. 1357 0x0000054D An attempt was made to exceed the limit on the number of domains per server. 1358 0x0000054E Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. 1359 0x0000054F The security account database contains an internal inconsistency. 1360 0x00000550 Generic access types were contained in an access mask which should already be mapped to non-generic types. 1361 0x00000551 A security descriptor is not in the right format (absolute or self-relative). 1362 0x00000552 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. 1363 0x00000553 Cannot start a new logon session with an ID that is already in use. 1364 0x00000554 A specified authentication package is unknown. 1365 0x00000555 The logon session is not in a state that is consistent with the requested operation. 1366 0x00000556 The logon session ID is already in use. 1367 0x00000557 A logon request contained an invalid logon type value. 1368 0x00000558 Unable to impersonate via a named pipe until data has been read from that pipe. 1369 0x00000559 The transaction state of a Registry subtree is incompatible with the requested operation. 1370 0x0000055A An internal security database corruption has been encountered. 1371 0x0000055B Cannot perform this operation on built-in accounts. 1372 0x0000055C Cannot perform this operation on this built-in special group. 1373 0x0000055D Cannot perform this operation on this built-in special user. 1374 0x0000055E The user cannot be removed from a group because the group is currently the user's primary group. 1375 0x0000055F The token is already in use as a primary token. 1376 0x00000560 The specified local group does not exist. 1377 0x00000561 The specified account name is not a member of the local group. 1378 0x00000562 The specified account name is already a member of the local group. 1379 0x00000563 The specified local group already exists. 1380 0x00000564 Logon failure: the user has not been granted the requested logon type at this computer. 1381 0x00000565 The maximum number of secrets that may be stored in a single system has been exceeded. 1382 0x00000566 The length of a secret exceeds the maximum length allowed. 1383 0x00000567 The local security authority database contains an internal inconsistency. 1384 0x00000568 During a logon attempt, the user's security context accumulated too many security IDs. 1385 0x00000569 Logon failure: the user has not been granted the requested logon type at this computer. 1386 0x0000056A A cross-encrypted password is necessary to change a user password. 1387 0x0000056B A new member could not be added to a local group because the member does not exist. 1388 0x0000056C A new member could not be added to a local group because the member has the wrong account type. 1389 0x0000056D Too many security IDs have been specified. 1390 0x0000056E A cross-encrypted password is necessary to change this user password. 1391 0x0000056F Indicates an ACL contains no inheritable components 1392 0x00000570 The file or directory is corrupt and non-readable. 1393 0x00000571 The disk structure is corrupt and non-readable. 1394 0x00000572 There is no user session key for the specified logon session. 1395 0x00000573 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. 1400 0x00000578 Invalid window handle. 1401 0x00000579 Invalid menu handle. 1402 0x0000057A Invalid cursor handle. 1403 0x0000057B Invalid accelerator table handle. 1404 0x0000057C Invalid hook handle. 1405 0x0000057D Invalid handle to a multiple-window position structure. 1406 0x0000057E Cannot create a top-level child window. 1407 0x0000057F Cannot find window class. 1408 0x00000580 Invalid window, belongs to other thread. 1409 0x00000581 Hot key is already registered. 1410 0x00000582 Class already exists. 1411 0x00000583 Class does not exist. 1412 0x00000584 Class still has open windows. 1413 0x00000585 Invalid index. 1414 0x00000586 Invalid icon handle. 1415 0x00000587 Using private DIALOG window words. 1416 0x00000588 The listbox identifier was not found. 1417 0x00000589 No wildcards were found. 1418 0x0000058A Thread does not have a clipboard open. 1419 0x0000058B Hot key is not registered. 1420 0x0000058C The window is not a valid dialog window. 1421 0x0000058D Control ID not found. 1422 0x0000058E Invalid message for a combo box because it does not have an edit control. 1423 0x0000058F The window is not a combo box. 1424 0x00000590 Height must be less than 256. 1425 0x00000591 Invalid device context (DC) handle. 1426 0x00000592 Invalid hook procedure type. 1427 0x00000593 Invalid hook procedure. 1428 0x00000594 Cannot set non-local hook without a module handle. 1429 0x00000595 This hook procedure can only be set globally. 1430 0x00000596 The journal hook procedure is already installed. 1431 0x00000597 The hook procedure is not installed. 1432 0x00000598 Invalid message for single-selection listbox. 1433 0x00000599 LB_SETCOUNT sent to non-lazy listbox. 1434 0x0000059A This list box does not support tab stops. 1435 0x0000059B Cannot destroy object created by another thread. 1436 0x0000059C Child windows cannot have menus. 1437 0x0000059D The window does not have a system menu. 1438 0x0000059E Invalid message box style. 1439 0x0000059F Invalid system-wide (SPI_*) parameter. 1440 0x000005A0 Screen already locked. 1441 0x000005A1 All handles to windows in a multiple-window position structure must have the same parent. 1442 0x000005A2 The window is not a child window. 1443 0x000005A3 Invalid GW_* command. 1444 0x000005A4 Invalid thread identifier. 1445 0x000005A5 Cannot process a message from a window that is not a multiple document interface (MDI) window. 1446 0x000005A6 Popup menu already active. 1447 0x000005A7 The window does not have scroll bars. 1448 0x000005A8 Scroll bar range cannot be greater than 0x7FFF. 1449 0x000005A9 Cannot show or remove the window in the way specified. 1450 0x000005AA Insufficient system resources exist to complete the requested service. 1451 0x000005AB Insufficient system resources exist to complete the requested service. 1452 0x000005AC Insufficient system resources exist to complete the requested service. 1453 0x000005AD Insufficient quota to complete the requested service. 1454 0x000005AE Insufficient quota to complete the requested service. 1455 0x000005AF The paging file is too small for this operation to complete. 1456 0x000005B0 A menu item was not found. 1457 0x000005B1 Invalid keyboard layout handle. 1458 0x000005B2 Hook type not allowed. 1459 0x000005B3 This operation requires an interactive windowstation. 1460 0x000005B4 This operation returned because the timeout period expired. 1461 0x000005B5 Invalid monitor handle. 1500 0x000005DC The event log file is corrupt. 1501 0x000005DD No event log file could be opened, so the event logging service did not start. 1502 0x000005DE The event log file is full. 1503 0x000005DF The event log file has changed between reads. 1700 0x000006A4 The string binding is invalid. 1701 0x000006A5 The binding handle is not the correct type. 1702 0x000006A6 The binding handle is invalid. 1703 0x000006A7 The RPC protocol sequence is not supported. 1704 0x000006A8 The RPC protocol sequence is invalid. 1705 0x000006A9 The string universal unique identifier (UUID) is invalid. 1706 0x000006AA The endpoint format is invalid. 1707 0x000006AB The network address is invalid. 1708 0x000006AC No endpoint was found. 1709 0x000006AD The timeout value is invalid. 1710 0x000006AE The object universal unique identifier (UUID) was not found. 1711 0x000006AF The object universal unique identifier (UUID) has already been registered. 1712 0x000006B0 The type universal unique identifier (UUID) has already been registered. 1713 0x000006B1 The RPC server is already listening. 1714 0x000006B2 No protocol sequences have been registered. 1715 0x000006B3 The RPC server is not listening. 1716 0x000006B4 The manager type is unknown. 1717 0x000006B5 The interface is unknown. 1718 0x000006B6 There are no bindings. 1719 0x000006B7 There are no protocol sequences. 1720 0x000006B8 The endpoint cannot be created. 1721 0x000006B9 Not enough resources are available to complete this operation. 1722 0x000006BA The RPC server is unavailable. 1723 0x000006BB The RPC server is too busy to complete this operation. 1724 0x000006BC The network options are invalid. 1725 0x000006BD There is not a remote procedure call active in this thread. 1726 0x000006BE The remote procedure call failed. 1727 0x000006BF The remote procedure call failed and did not execute. 1728 0x000006C0 A remote procedure call (RPC) protocol error occurred. 1730 0x000006C2 The transfer syntax is not supported by the RPC server. 1732 0x000006C4 The universal unique identifier (UUID) type is not supported. 1733 0x000006C5 The tag is invalid. 1734 0x000006C6 The array bounds are invalid. 1735 0x000006C7 The binding does not contain an entry name. 1736 0x000006C8 The name syntax is invalid. 1737 0x000006C9 The name syntax is not supported. 1739 0x000006CB No network address is available to use to construct a universal unique identifier (UUID). 1740 0x000006CC The endpoint is a duplicate. 1741 0x000006CD The authentication type is unknown. 1742 0x000006CE The maximum number of calls is too small. 1743 0x000006CF The string is too long. 1744 0x000006D0 The RPC protocol sequence was not found. 1745 0x000006D1 The procedure number is out of range. 1746 0x000006D2 The binding does not contain any authentication information. 1747 0x000006D3 The authentication service is unknown. 1748 0x000006D4 The authentication level is unknown. 1749 0x000006D5 The security context is invalid. 1750 0x000006D6 The authorization service is unknown. 1751 0x000006D7 The entry is invalid. 1752 0x000006D8 The server endpoint cannot perform the operation. 1753 0x000006D9 There are no more endpoints available from the endpoint mapper. 1754 0x000006DA No interfaces have been exported. 1755 0x000006DB The entry name is incomplete. 1756 0x000006DC The version option is invalid. 1757 0x000006DD There are no more members. 1758 0x000006DE There is nothing to unexport. 1759 0x000006DF The interface was not found. 1760 0x000006E0 The entry already exists. 1761 0x000006E1 The entry is not found. 1762 0x000006E2 The name service is unavailable. 1763 0x000006E3 The network address family is invalid. 1764 0x000006E4 The requested operation is not supported. 1765 0x000006E5 No security context is available to allow impersonation. 1766 0x000006E6 An internal error occurred in a remote procedure call (RPC). 1767 0x000006E7 The RPC server attempted an integer division by zero. 1768 0x000006E8 An addressing error occurred in the RPC server. 1769 0x000006E9 A floating-point operation at the RPC server caused a division by zero. 1770 0x000006EA A floating-point underflow occurred at the RPC server. 1771 0x000006EB A floating-point overflow occurred at the RPC server. 1772 0x000006EC The list of RPC servers available for the binding of auto handles has been exhausted. 1773 0x000006ED Unable to open the character translation table file. 1774 0x000006EE The file containing the character translation table has fewer than 512 bytes. 1775 0x000006EF A null context handle was passed from the client to the host during a remote procedure call. 1777 0x000006F1 The context handle changed during a remote procedure call. 1778 0x000006F2 The binding handles passed to a remote procedure call do not match. 1779 0x000006F3 The stub is unable to get the remote procedure call handle. 1780 0x000006F4 A null reference pointer was passed to the stub. 1781 0x000006F5 The enumeration value is out of range. 1782 0x000006F6 The byte count is too small. 1783 0x000006F7 The stub received bad data. 1784 0x000006F8 The supplied user buffer is not valid for the requested operation. 1785 0x000006F9 The disk media is not recognized. It may not be formatted. 1786 0x000006FA The workstation does not have a trust secret. 1787 0x000006FB The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship. 1788 0x000006FC The trust relationship between the primary domain and the trusted domain failed. 1789 0x000006FD The trust relationship between this workstation and the primary domain failed. 1790 0x000006FE The network logon failed. 1791 0x000006FF A remote procedure call is already in progress for this thread. 1792 0x00000700 An attempt was made to logon, but the network logon service was not started. 1793 0x00000701 The user's account has expired. 1794 0x00000702 The redirector is in use and cannot be unloaded. 1795 0x00000703 The specified printer driver is already installed. 1796 0x00000704 The specified port is unknown. 1797 0x00000705 The printer driver is unknown. 1798 0x00000706 The print processor is unknown. 1799 0x00000707 The specified separator file is invalid. 1800 0x00000708 The specified priority is invalid. 1801 0x00000709 The printer name is invalid. 1802 0x0000070A The printer already exists. 1803 0x0000070B The printer command is invalid. 1804 0x0000070C The specified datatype is invalid. 1805 0x0000070D The Environment specified is invalid. 1806 0x0000070E There are no more bindings. 1807 0x0000070F The account used is an interdomain trust account. Use your global user account or local user account to access this server. 1808 0x00000710 The account used is a Computer Account. Use your global user account or local user account to access this server. 1809 0x00000711 The account used is an server trust account. Use your global user account or local user account to access this server. 1810 0x00000712 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. 1811 0x00000713 The server is in use and cannot be unloaded. 1812 0x00000714 The specified image file did not contain a resource section. 1813 0x00000715 The specified resource type can not be found in the image file. 1814 0x00000716 The specified resource name can not be found in the image file. 1815 0x00000717 The specified resource language ID cannot be found in the image file. 1816 0x00000718 Not enough quota is available to process this command. 1817 0x00000719 No interfaces have been registered. 1818 0x0000071A The server was altered while processing this call. 1819 0x0000071B The binding handle does not contain all required information. 1820 0x0000071C Communications failure. 1821 0x0000071D The requested authentication level is not supported. 1822 0x0000071E No principal name registered. 1823 0x0000071F The error specified is not a valid Windows NT RPC error code. 1824 0x00000720 A UUID that is valid only on this computer has been allocated. 1825 0x00000721 A security package specific error occurred. 1826 0x00000722 Thread is not cancelled. 1827 0x00000723 Invalid operation on the encoding/decoding handle. 1828 0x00000724 Incompatible version of the serializing package. 1829 0x00000725 Incompatible version of the RPC stub. 1830 0x00000726 The idl pipe object is invalid or corrupted. 1831 0x00000727 The operation is invalid for a given idl pipe object. 1832 0x00000728 The idl pipe version is not supported. 1898 0x0000076A The group member was not found. 1899 0x0000076B The endpoint mapper database could not be created. 1900 0x0000076C The object universal unique identifier (UUID) is the nil UUID. 1901 0x0000076D The specified time is invalid. 1902 0x0000076E The specified Form name is invalid. 1903 0x0000076F The specified Form size is invalid 1904 0x00000770 The specified Printer handle is already being waited on 1905 0x00000771 The specified Printer has been deleted 1906 0x00000772 The state of the Printer is invalid 1907 0x00000773 The user must change his password before he logs on the first time. 1908 0x00000774 Could not find the domain controller for this domain. 1909 0x00000775 The referenced account is currently locked out and may not be logged on to. 1910 0x00000776 The object exporter specified was not found. 1911 0x00000777 The object specified was not found. 1912 0x00000778 The object resolver set specified was not found. 1913 0x00000779 Some data remains to be sent in the request buffer. 2000 0x000007D0 The pixel format is invalid. 2001 0x000007D1 The specified driver is invalid. 2002 0x000007D2 The window style or class attribute is invalid for this operation. 2003 0x000007D3 The requested metafile operation is not supported. 2004 0x000007D4 The requested transformation operation is not supported. 2005 0x000007D5 The requested clipping operation is not supported. 2108 0x0000083C The network connection was made successfully but the user had to be prompted for a password other than the one originally specified. 2202 0x0000089A The specified username is invalid. 2250 0x000008CA This network connection does not exist. 2401 0x00000961 This network connection has files open or requests pending. 2402 0x00000962 Active connections still exist. 2404 0x00000964 The device is in use by an active process and cannot be disconnected. 3000 0x00000BB8 The specified print monitor is unknown. 3001 0x00000BB9 The specified printer driver is currently in use. 3002 0x00000BBA The spool file was not found. 3003 0x00000BBB A StartDocPrinter call was not issued. 3004 0x00000BBC An AddJob call was not issued. 3005 0x00000BBD The specified print processor has already been installed. 3006 0x00000BBE The specified print monitor has already been installed. 3007 0x00000BBF The specified print monitor does not have the required functions. 3008 0x00000BC0 The specified print monitor is currently in use. 3009 0x00000BC1 The requested operation is not allowed when there are jobs queued to the printer. 3010 0x00000BC2 The requested operation is successful. Changes will not be effective until the system is rebooted. 3011 0x00000BC3 The requested operation is successful. Changes will not be effective until the service is restarted. 4000 0x00000FA0 WINS encountered an error while processing the command. 4001 0x00000FA1 The local WINS can not be deleted. 4002 0x00000FA2 The importation from the file failed. 4003 0x00000FA3 The backup Failed. Was a full backup done before ? 4004 0x00000FA4 The backup Failed. Check the directory that you are backing the database to. 4005 0x00000FA5 The name does not exist in the WINS database. 4006 0x00000FA6 Replication with a non-configured partner is not allowed. 4100 0x00001004 The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. 5001 0x00001389 The cluster resource cannot be moved to another group because other resources are dependent on it. 5002 0x0000138A The cluster resource dependency cannot be found. 5003 0x0000138B The cluster resource cannot be made dependent on the specified resource because it is already dependent. 5004 0x0000138C The cluster resource is not online. 5005 0x0000138D A cluster node is not available for this operation. 5006 0x0000138E The cluster resource is not available. 5007 0x0000138F The cluster resource could not be found. 5008 0x00001390 The cluster is being shut down. 5009 0x00001391 A cluster node cannot be evicted from the cluster while it is online. 5010 0x00001392 The object already exists. 5011 0x00001393 The object is already in the list. 5012 0x00001394 The cluster group is not available for any new requests. 5013 0x00001395 The cluster group could not be found. 5014 0x00001396 The operation could not be completed because the cluster group is not online. 5015 0x00001397 The cluster node is not the owner of the resource. 5016 0x00001398 The cluster node is not the owner of the group. 5017 0x00001399 The cluster resource could not be created in the specified resource monitor. 5018 0x0000139A The cluster resource could not be brought online by the resource monitor. 5019 0x0000139B The operation could not be completed because the cluster resource is online. 5020 0x0000139C The cluster resource could not be deleted or brought offline because it is the quorum resource. 5021 0x0000139D The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. 5022 0x0000139E The cluster software is shutting down. 5023 0x0000139F The group or resource is not in the correct state to perform the requested operation. 5024 0x000013A0 The properties were stored but not all changes will take effect until the next time the resource is brought online. 5025 0x000013A1 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. 5026 0x000013A2 The cluster resource could not be deleted since it is a core resource. 5027 0x000013A3 The quorum resource failed to come online. 5028 0x000013A4 The quorum log could not be created or mounted successfully. 5029 0x000013A5 The cluster log is corrupt. 5030 0x000013A6 The record could not be written to the cluster log since it exceeds the maximum size. 5031 0x000013A7 The cluster log exceeds its maximum size. 5032 0x000013A8 No checkpoint record was found in the cluster log. 5033 0x000013A9 The minimum required disk space needed for logging is not available. 6118 0x000017E6 The list of servers for this workgroup is not currently available Miscellaneous error codes 0x00030000 to 0x00042000: ...this could take a just a little while ( 73,728 itins ) 197120 0x00030200 The underlying file was converted to compound file format. 197121 0x00030201 The storage operation should block until more data is available. 197122 0x00030202 The storage operation should retry immediately. 197123 0x00030203 The notified event sink will not influence the storage operation. 262144 0x00040000 Use the registry database to provide the requested information 262145 0x00040001 Success, but static 262146 0x00040002 Macintosh clipboard format 262400 0x00040100 Successful drop took place 262401 0x00040101 Drag-drop operation canceled 262402 0x00040102 Use the default cursor 262448 0x00040130 Data has same FORMATETC 262464 0x00040140 View is already frozen 262512 0x00040170 FORMATETC not supported 262513 0x00040171 Same cache 262514 0x00040172 Some cache(s) not updated 262528 0x00040180 Invalid verb for OLE object 262529 0x00040181 Verb number is valid but verb cannot be done now 262530 0x00040182 Invalid window handle passed 262560 0x000401A0 Message is too long; some of it had to be truncated before displaying 262592 0x000401C0 Unable to convert OLESTREAM to IStorage 262626 0x000401E2 Moniker reduced to itself 262628 0x000401E4 Common prefix is this moniker 262629 0x000401E5 Common prefix is input moniker 262630 0x000401E6 Common prefix is both monikers 262631 0x000401E7 Moniker is already registered in running object table OLE error codes 0x80000000 to 0x8009FFFF: ...this will take a little longer ( 655,359 itins! ) -2147483647 0x80000001 Not implemented -2147483646 0x80000002 Ran out of memory -2147483645 0x80000003 One or more arguments are invalid -2147483644 0x80000004 No such interface supported -2147483643 0x80000005 Invalid pointer -2147483642 0x80000006 Invalid handle -2147483641 0x80000007 Operation aborted -2147483640 0x80000008 Unspecified error -2147483639 0x80000009 General access denied error -2147483638 0x8000000A The data necessary to complete this operation is not yet available. -2147467263 0x80004001 Not implemented -2147467262 0x80004002 No such interface supported -2147467261 0x80004003 Invalid pointer -2147467260 0x80004004 Operation aborted -2147467259 0x80004005 Unspecified error -2147467258 0x80004006 Thread local storage failure -2147467257 0x80004007 Get shared memory allocator failure -2147467256 0x80004008 Get memory allocator failure -2147467255 0x80004009 Unable to initialize class cache -2147467254 0x8000400A Unable to initialize RPC services -2147467253 0x8000400B Cannot set thread local storage channel control -2147467252 0x8000400C Could not allocate thread local storage channel control -2147467251 0x8000400D The user supplied memory allocator is unacceptable -2147467250 0x8000400E The OLE service mutex already exists -2147467249 0x8000400F The OLE service file mapping already exists -2147467248 0x80004010 Unable to map view of file for OLE service -2147467247 0x80004011 Failure attempting to launch OLE service -2147467246 0x80004012 There was an attempt to call CoInitialize a second time while single threaded -2147467245 0x80004013 A Remote activation was necessary but was not allowed -2147467244 0x80004014 A Remote activation was necessary but the server name provided was invalid -2147467243 0x80004015 The class is configured to run as a security id different from the caller -2147467242 0x80004016 Use of Ole1 services requiring DDE windows is disabled -2147467241 0x80004017 A RunAs specification must be \ or simply -2147467240 0x80004018 The server process could not be started. The pathname may be incorrect. -2147467239 0x80004019 The server process could not be started as the configured identity. The pathname may be incorrect or unavailable. -2147467238 0x8000401A The server process could not be started because the configured identity is incorrect. Check the username and password. -2147467237 0x8000401B The client is not allowed to launch this server. -2147467236 0x8000401C The service providing this server could not be started. -2147467235 0x8000401D This computer was unable to communicate with the computer providing the server. -2147467234 0x8000401E The server did not respond after being launched. -2147467233 0x8000401F The registration information for this server is inconsistent or incomplete. -2147467232 0x80004020 The registration information for this interface is inconsistent or incomplete. -2147467231 0x80004021 The operation attempted is not supported. -2147418113 0x8000FFFF Catastrophic failure -2147418111 0x80010001 Call was rejected by callee. -2147418110 0x80010002 Call was canceled by the message filter. -2147418109 0x80010003 The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage. -2147418108 0x80010004 The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call. -2147418107 0x80010005 It is illegal to call out while inside message filter. -2147418106 0x80010006 The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid. -2147418105 0x80010007 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. -2147418104 0x80010008 The caller (client) disappeared while the callee (server) was processing a call. -2147418103 0x80010009 The data packet with the marshalled parameter data is incorrect. -2147418102 0x8001000A The call was not transmitted properly; the message queue was full and was not emptied after yielding. -2147418101 0x8001000B The client (caller) cannot marshall the parameter data - low memory, etc. -2147418100 0x8001000C The client (caller) cannot unmarshall the return data - low memory, etc. -2147418099 0x8001000D The server (callee) cannot marshall the return data - low memory, etc. -2147418098 0x8001000E The server (callee) cannot unmarshall the parameter data - low memory, etc. -2147418097 0x8001000F Received data is invalid; could be server or client data. -2147418096 0x80010010 A particular parameter is invalid and cannot be (un)marshalled. -2147418095 0x80010011 There is no second outgoing call on same channel in DDE conversation. -2147418094 0x80010012 The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute. -2147417856 0x80010100 System call failed. -2147417855 0x80010101 Could not allocate some required resource (memory, events, ...) -2147417854 0x80010102 Attempted to make calls on more than one thread in single threaded mode. -2147417853 0x80010103 The requested interface is not registered on the server object. -2147417852 0x80010104 RPC could not call the server or could not return the results of calling the server. -2147417851 0x80010105 The server threw an exception. -2147417850 0x80010106 Cannot change thread mode after it is set. -2147417849 0x80010107 The method called does not exist on the server. -2147417848 0x80010108 The object invoked has disconnected from its clients. -2147417847 0x80010109 The object invoked chose not to process the call now. Try again later. -2147417846 0x8001010A The message filter indicated that the application is busy. -2147417845 0x8001010B The message filter rejected the call. -2147417844 0x8001010C A call control interfaces was called with invalid data. -2147417843 0x8001010D An outgoing call cannot be made since the application is dispatching an input-synchronous call. -2147417842 0x8001010E The application called an interface that was marshalled for a different thread. -2147417841 0x8001010F CoInitialize has not been called on the current thread. -2147417840 0x80010110 The version of OLE on the client and server machines does not match. -2147417839 0x80010111 OLE received a packet with an invalid header. -2147417838 0x80010112 OLE received a packet with an invalid extension. -2147417837 0x80010113 The requested object or interface does not exist. -2147417836 0x80010114 The requested object does not exist. -2147417835 0x80010115 OLE has sent a request and is waiting for a reply. -2147417834 0x80010116 OLE is waiting before retrying a request. -2147417833 0x80010117 Call context cannot be accessed after call completed. -2147417832 0x80010118 Impersonate on unsecure calls is not supported. -2147417831 0x80010119 Security must be initialized before any interfaces are marshalled or unmarshalled. It cannot be changed once initialized. -2147417830 0x8001011A No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server. -2147417829 0x8001011B Access is denied. -2147417828 0x8001011C Remote calls are not allowed for this process. -2147417827 0x8001011D The marshaled interface data packet (OBJREF) has an invalid or unknown format. -2147352577 0x8001FFFF An internal error occurred. -2147352575 0x80020001 Unknown interface. -2147352573 0x80020003 Member not found. -2147352572 0x80020004 Parameter not found. -2147352571 0x80020005 Type mismatch. -2147352570 0x80020006 Unknown name. -2147352569 0x80020007 No named arguments. -2147352568 0x80020008 Bad variable type. -2147352567 0x80020009 Exception occurred. -2147352566 0x8002000A Out of present range. -2147352565 0x8002000B Invalid index. -2147352564 0x8002000C Unknown language. -2147352563 0x8002000D Memory is locked. -2147352562 0x8002000E Invalid number of parameters. -2147352561 0x8002000F Parameter not optional. -2147352560 0x80020010 Invalid callee. -2147352559 0x80020011 Does not support a collection. -2147319786 0x80028016 Buffer too small. -2147319784 0x80028018 Old format or invalid type library. -2147319783 0x80028019 Old format or invalid type library. -2147319780 0x8002801C Error accessing the OLE registry. -2147319779 0x8002801D Library not registered. -2147319769 0x80028027 Bound to unknown type. -2147319768 0x80028028 Qualified name disallowed. -2147319767 0x80028029 Invalid forward reference, or reference to uncompiled type. -2147319766 0x8002802A Type mismatch. -2147319765 0x8002802B Element not found. -2147319764 0x8002802C Ambiguous name. -2147319763 0x8002802D Name already exists in the library. -2147319762 0x8002802E Unknown LCID. -2147319761 0x8002802F Function not defined in specified DLL. -2147317571 0x800288BD Wrong module kind for the operation. -2147317563 0x800288C5 Size may not exceed 64K. -2147317562 0x800288C6 Duplicate ID in inheritance hierarchy. -2147317553 0x800288CF Incorrect inheritance depth in standard OLE hmember. -2147316576 0x80028CA0 Type mismatch. -2147316575 0x80028CA1 Invalid number of arguments. -2147316574 0x80028CA2 I/O Error. -2147316573 0x80028CA3 Error creating unique tmp file. -2147312566 0x80029C4A Error loading type library/DLL. -2147312509 0x80029C83 Inconsistent property functions. -2147312508 0x80029C84 Circular dependency between types/modules. -2147287039 0x80030001 Unable to perform requested operation. -2147287038 0x80030002 %1 could not be found. -2147287037 0x80030003 The path %1 could not be found. -2147287036 0x80030004 There are insufficient resources to open another file. -2147287035 0x80030005 Access Denied. -2147287034 0x80030006 Attempted an operation on an invalid object. -2147287032 0x80030008 There is insufficient memory available to complete operation. -2147287031 0x80030009 Invalid pointer error. -2147287022 0x80030012 There are no more entries to return. -2147287021 0x80030013 Disk is write-protected. -2147287015 0x80030019 An error occurred during a seek operation. -2147287011 0x8003001D A disk error occurred during a write operation. -2147287010 0x8003001E A disk error occurred during a read operation. -2147287008 0x80030020 A share violation has occurred. -2147287007 0x80030021 A lock violation has occurred. -2147286960 0x80030050 %1 already exists. -2147286953 0x80030057 Invalid parameter error. -2147286928 0x80030070 There is insufficient disk space to complete operation. -2147286800 0x800300F0 Illegal write of non-simple property to simple property set. -2147286790 0x800300FA An API call exited abnormally. -2147286789 0x800300FB The file %1 is not a valid compound file. -2147286788 0x800300FC The name %1 is not valid. -2147286787 0x800300FD An unexpected error occurred. -2147286786 0x800300FE That function is not implemented. -2147286785 0x800300FF Invalid flag error. -2147286784 0x80030100 Attempted to use an object that is busy. -2147286783 0x80030101 The storage has been changed since the last commit. -2147286782 0x80030102 Attempted to use an object that has ceased to exist. -2147286781 0x80030103 Can't save. -2147286780 0x80030104 The compound file %1 was produced with an incompatible version of storage. -2147286779 0x80030105 The compound file %1 was produced with a newer version of storage. -2147286778 0x80030106 Share.exe or equivalent is required for operation. -2147286777 0x80030107 Illegal operation called on non-file based storage. -2147286776 0x80030108 Illegal operation called on object with extant marshallings. -2147286775 0x80030109 The docfile has been corrupted. -2147286768 0x80030110 OLE32.DLL has been loaded at the wrong address. -2147286527 0x80030201 The file download was aborted abnormally. The file is incomplete. -2147286526 0x80030202 The file download has been terminated. -2147221504 0x80040000 Invalid OLEVERB structure -2147221503 0x80040001 Invalid advise flags -2147221502 0x80040002 Can't enumerate any more, because the associated data is missing -2147221501 0x80040003 This implementation doesn't take advises -2147221500 0x80040004 There is no connection for this connection ID -2147221499 0x80040005 Need to run the object to perform this operation -2147221498 0x80040006 There is no cache to operate on -2147221497 0x80040007 Uninitialized object -2147221496 0x80040008 Linked object's source class has changed -2147221495 0x80040009 Not able to get the moniker of the object -2147221494 0x8004000A Not able to bind to the source -2147221493 0x8004000B Object is static; operation not allowed -2147221492 0x8004000C User cancelled out of save dialog -2147221491 0x8004000D Invalid rectangle -2147221490 0x8004000E compobj.dll is too old for the ole2.dll initialized -2147221489 0x8004000F Invalid window handle -2147221488 0x80040010 Object is not in any of the inplace active states -2147221487 0x80040011 Not able to convert object -2147221486 0x80040012 Not able to perform the operation because object is not given storage yet -2147221404 0x80040064 Invalid FORMATETC structure -2147221403 0x80040065 Invalid DVTARGETDEVICE structure -2147221402 0x80040066 Invalid STDGMEDIUM structure -2147221401 0x80040067 Invalid STATDATA structure -2147221400 0x80040068 Invalid lindex -2147221399 0x80040069 Invalid tymed -2147221398 0x8004006A Invalid clipboard format -2147221397 0x8004006B Invalid aspect(s) -2147221396 0x8004006C tdSize parameter of the DVTARGETDEVICE structure is invalid -2147221395 0x8004006D Object doesn't support IViewObject interface -2147221248 0x80040100 Trying to revoke a drop target that has not been registered -2147221247 0x80040101 This window has already been registered as a drop target -2147221246 0x80040102 Invalid window handle -2147221232 0x80040110 Class does not support aggregation (or class object is remote) -2147221231 0x80040111 ClassFactory cannot supply requested class -2147221184 0x80040140 Error drawing view -2147221168 0x80040150 Could not read key from registry -2147221167 0x80040151 Could not write key to registry -2147221166 0x80040152 Could not find the key in the registry -2147221165 0x80040153 Invalid value for registry -2147221164 0x80040154 Class not registered -2147221163 0x80040155 Interface not registered -2147221136 0x80040170 Cache not updated -2147221120 0x80040180 No verbs for OLE object -2147221119 0x80040181 Invalid verb for OLE object -2147221088 0x800401A0 Undo is not available -2147221087 0x800401A1 Space for tools is not available -2147221056 0x800401C0 OLESTREAM Get method failed -2147221055 0x800401C1 OLESTREAM Put method failed -2147221054 0x800401C2 Contents of the OLESTREAM not in correct format -2147221053 0x800401C3 There was an error in a Windows GDI call while converting the bitmap to a DIB -2147221052 0x800401C4 Contents of the IStorage not in correct format -2147221051 0x800401C5 Contents of IStorage is missing one of the standard streams -2147221050 0x800401C6 There was an error in a Windows GDI call while converting the DIB to a bitmap. -2147221040 0x800401D0 OpenClipboard Failed -2147221039 0x800401D1 EmptyClipboard Failed -2147221038 0x800401D2 SetClipboard Failed -2147221037 0x800401D3 Data on clipboard is invalid -2147221036 0x800401D4 CloseClipboard Failed -2147221024 0x800401E0 Moniker needs to be connected manually -2147221023 0x800401E1 Operation exceeded deadline -2147221022 0x800401E2 Moniker needs to be generic -2147221021 0x800401E3 Operation unavailable -2147221020 0x800401E4 Invalid syntax -2147221019 0x800401E5 No object for moniker -2147221018 0x800401E6 Bad extension for file -2147221017 0x800401E7 Intermediate operation failed -2147221016 0x800401E8 Moniker is not bindable -2147221015 0x800401E9 Moniker is not bound -2147221014 0x800401EA Moniker cannot open file -2147221013 0x800401EB User input required for operation to succeed -2147221012 0x800401EC Moniker class has no inverse -2147221011 0x800401ED Moniker does not refer to storage -2147221010 0x800401EE No common prefix -2147221009 0x800401EF Moniker could not be enumerated -2147221008 0x800401F0 CoInitialize has not been called. -2147221007 0x800401F1 CoInitialize has already been called. -2147221006 0x800401F2 Class of object cannot be determined -2147221005 0x800401F3 Invalid class string -2147221004 0x800401F4 Invalid interface string -2147221003 0x800401F5 Application not found -2147221002 0x800401F6 Application cannot be run more than once -2147221001 0x800401F7 Some error in application program -2147221000 0x800401F8 DLL for class not found -2147220999 0x800401F9 Error in the DLL -2147220998 0x800401FA Wrong OS or OS version for application -2147220997 0x800401FB Object is not registered -2147220996 0x800401FC Object is already registered -2147220995 0x800401FD Object is not connected to server -2147220994 0x800401FE Application was launched but it didn't register a class factory -2147220993 0x800401FF Object has been released -2147220992 0x80040200 Unable to impersonate DCOM client -2147220991 0x80040201 Unable to obtain server's security context -2147220990 0x80040202 Unable to open the access token of the current thread -2147220989 0x80040203 Unable to obtain user info from an access token -2147220988 0x80040204 The client who called IAccessControl::IsAccessPermitted was the trustee provided tot he method -2147220987 0x80040205 Unable to obtain the client's security blanket -2147220986 0x80040206 Unable to set a discretionary ACL into a security descriptor -2147220985 0x80040207 The system function, AccessCheck, returned false -2147220984 0x80040208 Either NetAccessDel or NetAccessAdd returned an error code. -2147220983 0x80040209 One of the trustee strings provided by the user did not conform to the \ syntax and it was not the "*" string -2147220982 0x8004020A One of the security identifiers provided by the user was invalid -2147220981 0x8004020B Unable to convert a wide character trustee string to a multibyte trustee string -2147220980 0x8004020C Unable to find a security identifier that corresponds to a trustee string provided by the user -2147220979 0x8004020D The system function, LookupAccountSID, failed -2147220978 0x8004020E Unable to find a trustee name that corresponds to a security identifier provided by the user -2147220977 0x8004020F The system function, LookupAccountName, failed -2147220976 0x80040210 Unable to set or reset a serialization handle -2147220975 0x80040211 Unable to obtain the Windows directory -2147220974 0x80040212 Path too long -2147220973 0x80040213 Unable to generate a uuid. -2147220972 0x80040214 Unable to create file -2147220971 0x80040215 Unable to close a serialization handle or a file handle. -2147220970 0x80040216 The number of ACEs in an ACL exceeds the system limit -2147220969 0x80040217 Not all the DENY_ACCESS ACEs are arranged in front of the GRANT_ACCESS ACEs in the stream -2147220968 0x80040218 The version of ACL format in the stream is not supported by this implementation of IAccessControl -2147220967 0x80040219 Unable to open the access token of the server process -2147220966 0x8004021A Unable to decode the ACL in the stream provided by the user -2147220965 0x8004021B The COM IAccessControl object is not initialized -2147024896 0x80070000 The operation completed successfully. -2147024895 0x80070001 Incorrect function. -2147024894 0x80070002 The system cannot find the file specified. -2147024893 0x80070003 The system cannot find the path specified. -2147024892 0x80070004 The system cannot open the file. -2147024891 0x80070005 Access is denied. -2147024890 0x80070006 The handle is invalid. -2147024889 0x80070007 The storage control blocks were destroyed. -2147024888 0x80070008 Not enough storage is available to process this command. -2147024887 0x80070009 The storage control block address is invalid. -2147024886 0x8007000A The environment is incorrect. -2147024885 0x8007000B An attempt was made to load a program with an incorrect format. -2147024884 0x8007000C The access code is invalid. -2147024883 0x8007000D The data is invalid. -2147024882 0x8007000E Not enough storage is available to complete this operation. -2147024881 0x8007000F The system cannot find the drive specified. -2147024880 0x80070010 The directory cannot be removed. -2147024879 0x80070011 The system cannot move the file to a different disk drive. -2147024878 0x80070012 There are no more files. -2147024877 0x80070013 The media is write protected. -2147024876 0x80070014 The system cannot find the device specified. -2147024875 0x80070015 The device is not ready. -2147024874 0x80070016 The device does not recognize the command. -2147024873 0x80070017 Data error (cyclic redundancy check) -2147024872 0x80070018 The program issued a command but the command length is incorrect. -2147024871 0x80070019 The drive cannot locate a specific area or track on the disk. -2147024870 0x8007001A The specified disk or diskette cannot be accessed. -2147024869 0x8007001B The drive cannot find the sector requested. -2147024868 0x8007001C The printer is out of paper. -2147024867 0x8007001D The system cannot write to the specified device. -2147024866 0x8007001E The system cannot read from the specified device. -2147024865 0x8007001F A device attached to the system is not functioning. -2147024864 0x80070020 The process cannot access the file because it is being used by another process. -2147024863 0x80070021 The process cannot access the file because another process has locked a portion of the file. -2147024862 0x80070022 The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. -2147024860 0x80070024 Too many files opened for sharing. -2147024858 0x80070026 Reached end of file. -2147024857 0x80070027 The disk is full. -2147024846 0x80070032 The network request is not supported. -2147024845 0x80070033 The remote computer is not available. -2147024844 0x80070034 A duplicate name exists on the network. -2147024843 0x80070035 The network path was not found. -2147024842 0x80070036 The network is busy. -2147024841 0x80070037 The specified network resource or device is no longer available. -2147024840 0x80070038 The network BIOS command limit has been reached. -2147024839 0x80070039 A network adapter hardware error occurred. -2147024838 0x8007003A The specified server cannot perform the requested operation. -2147024837 0x8007003B An unexpected network error occurred. -2147024836 0x8007003C The remote adapter is not compatible. -2147024835 0x8007003D The printer queue is full. -2147024834 0x8007003E Space to store the file waiting to be printed is not available on the server. -2147024833 0x8007003F Your file waiting to be printed was deleted. -2147024832 0x80070040 The specified network name is no longer available. -2147024831 0x80070041 Network access is denied. -2147024830 0x80070042 The network resource type is not correct. -2147024829 0x80070043 The network name cannot be found. -2147024828 0x80070044 The name limit for the local computer network adapter card was exceeded. -2147024827 0x80070045 The network BIOS session limit was exceeded. -2147024826 0x80070046 The remote server has been paused or is in the process of being started. -2147024825 0x80070047 No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. -2147024824 0x80070048 The specified printer or disk device has been paused. -2147024816 0x80070050 The file exists. -2147024814 0x80070052 The directory or file cannot be created. -2147024813 0x80070053 Fail on INT 24 -2147024812 0x80070054 Storage to process this request is not available. -2147024811 0x80070055 The local device name is already in use. -2147024810 0x80070056 The specified network password is not correct. -2147024809 0x80070057 The parameter is incorrect. -2147024808 0x80070058 A write fault occurred on the network. -2147024807 0x80070059 The system cannot start another process at this time. -2147024796 0x80070064 Cannot create another system semaphore. -2147024795 0x80070065 The exclusive semaphore is owned by another process. -2147024794 0x80070066 The semaphore is set and cannot be closed. -2147024793 0x80070067 The semaphore cannot be set again. -2147024792 0x80070068 Cannot request exclusive semaphores at interrupt time. -2147024791 0x80070069 The previous ownership of this semaphore has ended. -2147024790 0x8007006A Insert the diskette for drive %1. -2147024789 0x8007006B Program stopped because alternate diskette was not inserted. -2147024788 0x8007006C The disk is in use or locked by another process. -2147024787 0x8007006D The pipe has been ended. -2147024786 0x8007006E The system cannot open the device or file specified. -2147024785 0x8007006F The file name is too long. -2147024784 0x80070070 There is not enough space on the disk. -2147024783 0x80070071 No more internal file identifiers available. -2147024782 0x80070072 The target internal file identifier is incorrect. -2147024779 0x80070075 The IOCTL call made by the application program is not correct. -2147024778 0x80070076 The verify-on-write switch parameter value is not correct. -2147024777 0x80070077 The system does not support the command requested. -2147024776 0x80070078 This function is only valid in Windows NT mode. -2147024775 0x80070079 The semaphore timeout period has expired. -2147024774 0x8007007A The data area passed to a system call is too small. -2147024773 0x8007007B The filename, directory name, or volume label syntax is incorrect. -2147024772 0x8007007C The system call level is not correct. -2147024771 0x8007007D The disk has no volume label. -2147024770 0x8007007E The specified module could not be found. -2147024769 0x8007007F The specified procedure could not be found. -2147024768 0x80070080 There are no child processes to wait for. -2147024767 0x80070081 The %1 application cannot be run in Windows NT mode. -2147024766 0x80070082 Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. -2147024765 0x80070083 An attempt was made to move the file pointer before the beginning of the file. -2147024764 0x80070084 The file pointer cannot be set on the specified device or file. -2147024763 0x80070085 A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. -2147024762 0x80070086 An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. -2147024761 0x80070087 An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. -2147024760 0x80070088 The system tried to delete the JOIN of a drive that is not joined. -2147024759 0x80070089 The system tried to delete the substitution of a drive that is not substituted. -2147024758 0x8007008A The system tried to join a drive to a directory on a joined drive. -2147024757 0x8007008B The system tried to substitute a drive to a directory on a substituted drive. -2147024756 0x8007008C The system tried to join a drive to a directory on a substituted drive. -2147024755 0x8007008D The system tried to SUBST a drive to a directory on a joined drive. -2147024754 0x8007008E The system cannot perform a JOIN or SUBST at this time. -2147024753 0x8007008F The system cannot join or substitute a drive to or for a directory on the same drive. -2147024752 0x80070090 The directory is not a subdirectory of the root directory. -2147024751 0x80070091 The directory is not empty. -2147024750 0x80070092 The path specified is being used in a substitute. -2147024749 0x80070093 Not enough resources are available to process this command. -2147024748 0x80070094 The path specified cannot be used at this time. -2147024747 0x80070095 An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. -2147024746 0x80070096 System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. -2147024745 0x80070097 The number of specified semaphore events for DosMuxSemWait is not correct. -2147024744 0x80070098 DosMuxSemWait did not execute; too many semaphores are already set. -2147024743 0x80070099 The DosMuxSemWait list is not correct. -2147024742 0x8007009A The volume label you entered exceeds the label character limit of the target file system. -2147024741 0x8007009B Cannot create another thread. -2147024740 0x8007009C The recipient process has refused the signal. -2147024739 0x8007009D The segment is already discarded and cannot be locked. -2147024738 0x8007009E The segment is already unlocked. -2147024737 0x8007009F The address for the thread ID is not correct. -2147024736 0x800700A0 The argument string passed to DosExecPgm is not correct. -2147024735 0x800700A1 The specified path is invalid. -2147024734 0x800700A2 A signal is already pending. -2147024732 0x800700A4 No more threads can be created in the system. -2147024729 0x800700A7 Unable to lock a region of a file. -2147024726 0x800700AA The requested resource is in use. -2147024723 0x800700AD A lock request was not outstanding for the supplied cancel region. -2147024722 0x800700AE The file system does not support atomic changes to the lock type. -2147024716 0x800700B4 The system detected a segment number that was not correct. -2147024714 0x800700B6 The operating system cannot run %1. -2147024713 0x800700B7 Cannot create a file when that file already exists. -2147024710 0x800700BA The flag passed is not correct. -2147024709 0x800700BB The specified system semaphore name was not found. -2147024708 0x800700BC The operating system cannot run %1. -2147024707 0x800700BD The operating system cannot run %1. -2147024706 0x800700BE The operating system cannot run %1. -2147024705 0x800700BF Cannot run %1 in Windows NT mode. -2147024704 0x800700C0 The operating system cannot run %1. -2147024703 0x800700C1 %1 is not a valid Windows NT application. -2147024702 0x800700C2 The operating system cannot run %1. -2147024701 0x800700C3 The operating system cannot run %1. -2147024700 0x800700C4 The operating system cannot run this application program. -2147024699 0x800700C5 The operating system is not presently configured to run this application. -2147024698 0x800700C6 The operating system cannot run %1. -2147024697 0x800700C7 The operating system cannot run this application program. -2147024696 0x800700C8 The code segment cannot be greater than or equal to 64KB. -2147024695 0x800700C9 The operating system cannot run %1. -2147024694 0x800700CA The operating system cannot run %1. -2147024693 0x800700CB The system could not find the environment option that was entered. -2147024691 0x800700CD No process in the command subtree has a signal handler. -2147024690 0x800700CE The filename or extension is too long. -2147024689 0x800700CF The ring 2 stack is in use. -2147024688 0x800700D0 The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. -2147024687 0x800700D1 The signal being posted is not correct. -2147024686 0x800700D2 The signal handler cannot be set. -2147024684 0x800700D4 The segment is locked and cannot be reallocated. -2147024682 0x800700D6 Too many dynamic link modules are attached to this program or dynamic link module. -2147024681 0x800700D7 Can't nest calls to LoadModule. -2147024680 0x800700D8 The image file %1 is valid, but is for a machine type other than the current machine. -2147024666 0x800700E6 The pipe state is invalid. -2147024665 0x800700E7 All pipe instances are busy. -2147024664 0x800700E8 The pipe is being closed. -2147024663 0x800700E9 No process is on the other end of the pipe. -2147024662 0x800700EA More data is available. -2147024656 0x800700F0 The session was cancelled. -2147024642 0x800700FE The specified extended attribute name was invalid. -2147024641 0x800700FF The extended attributes are inconsistent. -2147024637 0x80070103 No more data is available. -2147024630 0x8007010A The Copy API cannot be used. -2147024629 0x8007010B The directory name is invalid. -2147024621 0x80070113 The extended attributes did not fit in the buffer. -2147024620 0x80070114 The extended attribute file on the mounted file system is corrupt. -2147024619 0x80070115 The extended attribute table file is full. -2147024618 0x80070116 The specified extended attribute handle is invalid. -2147024614 0x8007011A The mounted file system does not support extended attributes. -2147024608 0x80070120 Attempt to release mutex not owned by caller. -2147024598 0x8007012A Too many posts were made to a semaphore. -2147024597 0x8007012B Only part of a Read/WriteProcessMemory request was completed. -2147024579 0x8007013D The system cannot find message for message number 0x%1 in message file for %2. -2147024409 0x800701E7 Attempt to access invalid address. -2147024362 0x80070216 Arithmetic result exceeded 32 bits. -2147024361 0x80070217 There is a process on other end of the pipe. -2147024360 0x80070218 Waiting for a process to open the other end of the pipe. -2147023902 0x800703E2 Access to the extended attribute was denied. -2147023901 0x800703E3 The I/O operation has been aborted because of either a thread exit or an application request. -2147023900 0x800703E4 Overlapped I/O event is not in a signalled state. -2147023899 0x800703E5 Overlapped I/O operation is in progress. -2147023898 0x800703E6 Invalid access to memory location. -2147023897 0x800703E7 Error performing inpage operation. -2147023895 0x800703E9 Recursion too deep, stack overflowed. -2147023894 0x800703EA The window cannot act on the sent message. -2147023893 0x800703EB Cannot complete this function. -2147023892 0x800703EC Invalid flags. -2147023891 0x800703ED The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt. -2147023890 0x800703EE The volume for a file has been externally altered such that the opened file is no longer valid. -2147023889 0x800703EF The requested operation cannot be performed in full-screen mode. -2147023888 0x800703F0 An attempt was made to reference a token that does not exist. -2147023887 0x800703F1 The configuration registry database is corrupt. -2147023886 0x800703F2 The configuration registry key is invalid. -2147023885 0x800703F3 The configuration registry key could not be opened. -2147023884 0x800703F4 The configuration registry key could not be read. -2147023883 0x800703F5 The configuration registry key could not be written. -2147023882 0x800703F6 One of the files in the Registry database had to be recovered by use of a log or alternate copy. The recovery was successful. -2147023881 0x800703F7 The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt. -2147023880 0x800703F8 An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry. -2147023879 0x800703F9 The system has attempted to load or restore a file into the Registry, but the specified file is not in a Registry file format. -2147023878 0x800703FA Illegal operation attempted on a Registry key which has been marked for deletion. -2147023877 0x800703FB System could not allocate the required space in a Registry log. -2147023876 0x800703FC Cannot create a symbolic link in a Registry key that already has subkeys or values. -2147023875 0x800703FD Cannot create a stable subkey under a volatile parent key. -2147023874 0x800703FE A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. -2147023845 0x8007041B A stop control has been sent to a service which other running services are dependent on. -2147023844 0x8007041C The requested control is not valid for this service -2147023843 0x8007041D The service did not respond to the start or control request in a timely fashion. -2147023842 0x8007041E A thread could not be created for the service. -2147023841 0x8007041F The service database is locked. -2147023840 0x80070420 An instance of the service is already running. -2147023839 0x80070421 The account name is invalid or does not exist. -2147023838 0x80070422 The specified service is disabled and cannot be started. -2147023837 0x80070423 Circular service dependency was specified. -2147023836 0x80070424 The specified service does not exist as an installed service. -2147023835 0x80070425 The service cannot accept control messages at this time. -2147023834 0x80070426 The service has not been started. -2147023833 0x80070427 The service process could not connect to the service controller. -2147023832 0x80070428 An exception occurred in the service when handling the control request. -2147023831 0x80070429 The database specified does not exist. -2147023830 0x8007042A The service has returned a service-specific error code. -2147023829 0x8007042B The process terminated unexpectedly. -2147023828 0x8007042C The dependency service or group failed to start. -2147023827 0x8007042D The service did not start due to a logon failure. -2147023826 0x8007042E After starting, the service hung in a start-pending state. -2147023825 0x8007042F The specified service database lock is invalid. -2147023824 0x80070430 The specified service has been marked for deletion. -2147023823 0x80070431 The specified service already exists. -2147023822 0x80070432 The system is currently running with the last-known-good configuration. -2147023821 0x80070433 The dependency service does not exist or has been marked for deletion. -2147023820 0x80070434 The current boot has already been accepted for use as the last-known-good control set. -2147023819 0x80070435 No attempts to start the service have been made since the last boot. -2147023818 0x80070436 The name is already in use as either a service name or a service display name. -2147023817 0x80070437 The account specified for this service is different from the account specified for other services running in the same process. -2147023796 0x8007044C The physical end of the tape has been reached. -2147023795 0x8007044D A tape access reached a filemark. -2147023794 0x8007044E Beginning of tape or partition was encountered. -2147023793 0x8007044F A tape access reached the end of a set of files. -2147023792 0x80070450 No more data is on the tape. -2147023791 0x80070451 Tape could not be partitioned. -2147023790 0x80070452 When accessing a new tape of a multivolume partition, the current blocksize is incorrect. -2147023789 0x80070453 Tape partition information could not be found when loading a tape. -2147023788 0x80070454 Unable to lock the media eject mechanism. -2147023787 0x80070455 Unable to unload the media. -2147023786 0x80070456 Media in drive may have changed. -2147023785 0x80070457 The I/O bus was reset. -2147023784 0x80070458 No media in drive. -2147023783 0x80070459 No mapping for the Unicode character exists in the target multi-byte code page. -2147023782 0x8007045A A dynamic link library (DLL) initialization routine failed. -2147023781 0x8007045B A system shutdown is in progress. -2147023780 0x8007045C Unable to abort the system shutdown because no shutdown was in progress. -2147023779 0x8007045D The request could not be performed because of an I/O device error. -2147023778 0x8007045E No serial device was successfully initialized. The serial driver will unload. -2147023777 0x8007045F Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened. -2147023776 0x80070460 A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) -2147023775 0x80070461 A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) -2147023774 0x80070462 No ID address mark was found on the floppy disk. -2147023773 0x80070463 Mismatch between the floppy disk sector ID field and the floppy disk controller track address. -2147023772 0x80070464 The floppy disk controller reported an error that is not recognized by the floppy disk driver. -2147023771 0x80070465 The floppy disk controller returned inconsistent results in its registers. -2147023770 0x80070466 While accessing the hard disk, a recalibrate operation failed, even after retries. -2147023769 0x80070467 While accessing the hard disk, a disk operation failed even after retries. -2147023768 0x80070468 While accessing the hard disk, a disk controller reset was needed, but even that failed. -2147023767 0x80070469 Physical end of tape encountered. -2147023766 0x8007046A Not enough server storage is available to process this command. -2147023765 0x8007046B A potential deadlock condition has been detected. -2147023764 0x8007046C The base address or the file offset specified does not have the proper alignment. -2147023756 0x80070474 An attempt to change the system power state was vetoed by another application or driver. -2147023755 0x80070475 The system BIOS failed an attempt to change the system power state. -2147023754 0x80070476 An attempt was made to create more links on a file than the file system supports. -2147023746 0x8007047E The specified program requires a newer version of Windows. -2147023745 0x8007047F The specified program is not a Windows or MS-DOS program. -2147023744 0x80070480 Cannot start more than one instance of the specified program. -2147023743 0x80070481 The specified program was written for an older version of Windows. -2147023742 0x80070482 One of the library files needed to run this application is damaged. -2147023741 0x80070483 No application is associated with the specified file for this operation. -2147023740 0x80070484 An error occurred in sending the command to the application. -2147023739 0x80070485 One of the library files needed to run this application cannot be found. -2147023696 0x800704B0 The specified device name is invalid. -2147023695 0x800704B1 The device is not currently connected but it is a remembered connection. -2147023694 0x800704B2 An attempt was made to remember a device that had previously been remembered. -2147023693 0x800704B3 No network provider accepted the given network path. -2147023692 0x800704B4 The specified network provider name is invalid. -2147023691 0x800704B5 Unable to open the network connection profile. -2147023690 0x800704B6 The network connection profile is corrupt. -2147023689 0x800704B7 Cannot enumerate a non-container. -2147023688 0x800704B8 An extended error has occurred. -2147023687 0x800704B9 The format of the specified group name is invalid. -2147023686 0x800704BA The format of the specified computer name is invalid. -2147023685 0x800704BB The format of the specified event name is invalid. -2147023684 0x800704BC The format of the specified domain name is invalid. -2147023683 0x800704BD The format of the specified service name is invalid. -2147023682 0x800704BE The format of the specified network name is invalid. -2147023681 0x800704BF The format of the specified share name is invalid. -2147023680 0x800704C0 The format of the specified password is invalid. -2147023679 0x800704C1 The format of the specified message name is invalid. -2147023678 0x800704C2 The format of the specified message destination is invalid. -2147023677 0x800704C3 The credentials supplied conflict with an existing set of credentials. -2147023676 0x800704C4 An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. -2147023675 0x800704C5 The workgroup or domain name is already in use by another computer on the network. -2147023674 0x800704C6 The network is not present or not started. -2147023673 0x800704C7 The operation was cancelled by the user. -2147023672 0x800704C8 The requested operation cannot be performed on a file with a user mapped section open. -2147023671 0x800704C9 The remote system refused the network connection. -2147023670 0x800704CA The network connection was gracefully closed. -2147023669 0x800704CB The network transport endpoint already has an address associated with it. -2147023668 0x800704CC An address has not yet been associated with the network endpoint. -2147023667 0x800704CD An operation was attempted on a non-existent network connection. -2147023666 0x800704CE An invalid operation was attempted on an active network connection. -2147023665 0x800704CF The remote network is not reachable by the transport. -2147023664 0x800704D0 The remote system is not reachable by the transport. -2147023663 0x800704D1 The remote system does not support the transport protocol. -2147023662 0x800704D2 No service is operating at the destination network endpoint on the remote system. -2147023661 0x800704D3 The request was aborted. -2147023660 0x800704D4 The network connection was aborted by the local system. -2147023659 0x800704D5 The operation could not be completed. A retry should be performed. -2147023658 0x800704D6 A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. -2147023657 0x800704D7 Attempting to login during an unauthorized time of day for this account. -2147023656 0x800704D8 The account is not authorized to login from this station. -2147023655 0x800704D9 The network address could not be used for the operation requested. -2147023654 0x800704DA The service is already registered. -2147023653 0x800704DB The specified service does not exist. -2147023652 0x800704DC The operation being requested was not performed because the user has not been authenticated. -2147023651 0x800704DD The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. -2147023650 0x800704DE Return that wants caller to continue with work in progress. -2147023649 0x800704DF An attempt was made to perform an initialization operation when initialization has already been completed. -2147023648 0x800704E0 No more local devices. -2147023596 0x80070514 Not all privileges referenced are assigned to the caller. -2147023595 0x80070515 Some mapping between account names and security IDs was not done. -2147023594 0x80070516 No system quota limits are specifically set for this account. -2147023593 0x80070517 No encryption key is available. A well-known encryption key was returned. -2147023592 0x80070518 The NT password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string. -2147023591 0x80070519 The revision level is unknown. -2147023590 0x8007051A Indicates two revision levels are incompatible. -2147023589 0x8007051B This security ID may not be assigned as the owner of this object. -2147023588 0x8007051C This security ID may not be assigned as the primary group of an object. -2147023587 0x8007051D An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. -2147023586 0x8007051E The group may not be disabled. -2147023585 0x8007051F There are currently no logon servers available to service the logon request. -2147023584 0x80070520 A specified logon session does not exist. It may already have been terminated. -2147023583 0x80070521 A specified privilege does not exist. -2147023582 0x80070522 A required privilege is not held by the client. -2147023581 0x80070523 The name provided is not a properly formed account name. -2147023580 0x80070524 The specified user already exists. -2147023579 0x80070525 The specified user does not exist. -2147023578 0x80070526 The specified group already exists. -2147023577 0x80070527 The specified group does not exist. -2147023576 0x80070528 Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. -2147023575 0x80070529 The specified user account is not a member of the specified group account. -2147023574 0x8007052A The last remaining administration account cannot be disabled or deleted. -2147023573 0x8007052B Unable to update the password. The value provided as the current password is incorrect. -2147023572 0x8007052C Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. -2147023571 0x8007052D Unable to update the password because a password update rule has been violated. -2147023570 0x8007052E Logon failure: unknown user name or bad password. -2147023569 0x8007052F Logon failure: user account restriction. -2147023568 0x80070530 Logon failure: account logon time restriction violation. -2147023567 0x80070531 Logon failure: user not allowed to log on to this computer. -2147023566 0x80070532 Logon failure: the specified account password has expired. -2147023565 0x80070533 Logon failure: account currently disabled. -2147023564 0x80070534 No mapping between account names and security IDs was done. -2147023563 0x80070535 Too many local user identifiers (LUIDs) were requested at one time. -2147023562 0x80070536 No more local user identifiers (LUIDs) are available. -2147023561 0x80070537 The subauthority part of a security ID is invalid for this particular use. -2147023560 0x80070538 The access control list (ACL) structure is invalid. -2147023559 0x80070539 The security ID structure is invalid. -2147023558 0x8007053A The security descriptor structure is invalid. -2147023556 0x8007053C The inherited access control list (ACL) or access control entry (ACE) could not be built. -2147023555 0x8007053D The server is currently disabled. -2147023554 0x8007053E The server is currently enabled. -2147023553 0x8007053F The value provided was an invalid value for an identifier authority. -2147023552 0x80070540 No more memory is available for security information updates. -2147023551 0x80070541 The specified attributes are invalid, or incompatible with the attributes for the group as a whole. -2147023550 0x80070542 Either a required impersonation level was not provided, or the provided impersonation level is invalid. -2147023549 0x80070543 Cannot open an anonymous level security token. -2147023548 0x80070544 The validation information class requested was invalid. -2147023547 0x80070545 The type of the token is inappropriate for its attempted use. -2147023546 0x80070546 Unable to perform a security operation on an object which has no associated security. -2147023545 0x80070547 Indicates a Windows NT Server could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. -2147023544 0x80070548 The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation. -2147023543 0x80070549 The domain was in the wrong state to perform the security operation. -2147023542 0x8007054A This operation is only allowed for the Primary Domain Controller of the domain. -2147023541 0x8007054B The specified domain did not exist. -2147023540 0x8007054C The specified domain already exists. -2147023539 0x8007054D An attempt was made to exceed the limit on the number of domains per server. -2147023538 0x8007054E Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. -2147023537 0x8007054F The security account database contains an internal inconsistency. -2147023536 0x80070550 Generic access types were contained in an access mask which should already be mapped to non-generic types. -2147023535 0x80070551 A security descriptor is not in the right format (absolute or self-relative). -2147023534 0x80070552 The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. -2147023533 0x80070553 Cannot start a new logon session with an ID that is already in use. -2147023532 0x80070554 A specified authentication package is unknown. -2147023531 0x80070555 The logon session is not in a state that is consistent with the requested operation. -2147023530 0x80070556 The logon session ID is already in use. -2147023529 0x80070557 A logon request contained an invalid logon type value. -2147023528 0x80070558 Unable to impersonate via a named pipe until data has been read from that pipe. -2147023527 0x80070559 The transaction state of a Registry subtree is incompatible with the requested operation. -2147023526 0x8007055A An internal security database corruption has been encountered. -2147023525 0x8007055B Cannot perform this operation on built-in accounts. -2147023524 0x8007055C Cannot perform this operation on this built-in special group. -2147023523 0x8007055D Cannot perform this operation on this built-in special user. -2147023522 0x8007055E The user cannot be removed from a group because the group is currently the user's primary group. -2147023521 0x8007055F The token is already in use as a primary token. -2147023520 0x80070560 The specified local group does not exist. -2147023519 0x80070561 The specified account name is not a member of the local group. -2147023518 0x80070562 The specified account name is already a member of the local group. -2147023517 0x80070563 The specified local group already exists. -2147023516 0x80070564 Logon failure: the user has not been granted the requested logon type at this computer. -2147023515 0x80070565 The maximum number of secrets that may be stored in a single system has been exceeded. -2147023514 0x80070566 The length of a secret exceeds the maximum length allowed. -2147023513 0x80070567 The local security authority database contains an internal inconsistency. -2147023512 0x80070568 During a logon attempt, the user's security context accumulated too many security IDs. -2147023511 0x80070569 Logon failure: the user has not been granted the requested logon type at this computer. -2147023510 0x8007056A A cross-encrypted password is necessary to change a user password. -2147023509 0x8007056B A new member could not be added to a local group because the member does not exist. -2147023508 0x8007056C A new member could not be added to a local group because the member has the wrong account type. -2147023507 0x8007056D Too many security IDs have been specified. -2147023506 0x8007056E A cross-encrypted password is necessary to change this user password. -2147023505 0x8007056F Indicates an ACL contains no inheritable components -2147023504 0x80070570 The file or directory is corrupt and non-readable. -2147023503 0x80070571 The disk structure is corrupt and non-readable. -2147023502 0x80070572 There is no user session key for the specified logon session. -2147023501 0x80070573 The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept. -2147023496 0x80070578 Invalid window handle. -2147023495 0x80070579 Invalid menu handle. -2147023494 0x8007057A Invalid cursor handle. -2147023493 0x8007057B Invalid accelerator table handle. -2147023492 0x8007057C Invalid hook handle. -2147023491 0x8007057D Invalid handle to a multiple-window position structure. -2147023490 0x8007057E Cannot create a top-level child window. -2147023489 0x8007057F Cannot find window class. -2147023488 0x80070580 Invalid window, belongs to other thread. -2147023487 0x80070581 Hot key is already registered. -2147023486 0x80070582 Class already exists. -2147023485 0x80070583 Class does not exist. -2147023484 0x80070584 Class still has open windows. -2147023483 0x80070585 Invalid index. -2147023482 0x80070586 Invalid icon handle. -2147023481 0x80070587 Using private DIALOG window words. -2147023480 0x80070588 The listbox identifier was not found. -2147023479 0x80070589 No wildcards were found. -2147023478 0x8007058A Thread does not have a clipboard open. -2147023477 0x8007058B Hot key is not registered. -2147023476 0x8007058C The window is not a valid dialog window. -2147023475 0x8007058D Control ID not found. -2147023474 0x8007058E Invalid message for a combo box because it does not have an edit control. -2147023473 0x8007058F The window is not a combo box. -2147023472 0x80070590 Height must be less than 256. -2147023471 0x80070591 Invalid device context (DC) handle. -2147023470 0x80070592 Invalid hook procedure type. -2147023469 0x80070593 Invalid hook procedure. -2147023468 0x80070594 Cannot set non-local hook without a module handle. -2147023467 0x80070595 This hook procedure can only be set globally. -2147023466 0x80070596 The journal hook procedure is already installed. -2147023465 0x80070597 The hook procedure is not installed. -2147023464 0x80070598 Invalid message for single-selection listbox. -2147023463 0x80070599 LB_SETCOUNT sent to non-lazy listbox. -2147023462 0x8007059A This list box does not support tab stops. -2147023461 0x8007059B Cannot destroy object created by another thread. -2147023460 0x8007059C Child windows cannot have menus. -2147023459 0x8007059D The window does not have a system menu. -2147023458 0x8007059E Invalid message box style. -2147023457 0x8007059F Invalid system-wide (SPI_*) parameter. -2147023456 0x800705A0 Screen already locked. -2147023455 0x800705A1 All handles to windows in a multiple-window position structure must have the same parent. -2147023454 0x800705A2 The window is not a child window. -2147023453 0x800705A3 Invalid GW_* command. -2147023452 0x800705A4 Invalid thread identifier. -2147023451 0x800705A5 Cannot process a message from a window that is not a multiple document interface (MDI) window. -2147023450 0x800705A6 Popup menu already active. -2147023449 0x800705A7 The window does not have scroll bars. -2147023448 0x800705A8 Scroll bar range cannot be greater than 0x7FFF. -2147023447 0x800705A9 Cannot show or remove the window in the way specified. -2147023446 0x800705AA Insufficient system resources exist to complete the requested service. -2147023445 0x800705AB Insufficient system resources exist to complete the requested service. -2147023444 0x800705AC Insufficient system resources exist to complete the requested service. -2147023443 0x800705AD Insufficient quota to complete the requested service. -2147023442 0x800705AE Insufficient quota to complete the requested service. -2147023441 0x800705AF The paging file is too small for this operation to complete. -2147023440 0x800705B0 A menu item was not found. -2147023439 0x800705B1 Invalid keyboard layout handle. -2147023438 0x800705B2 Hook type not allowed. -2147023437 0x800705B3 This operation requires an interactive windowstation. -2147023436 0x800705B4 This operation returned because the timeout period expired. -2147023435 0x800705B5 Invalid monitor handle. -2147023396 0x800705DC The event log file is corrupt. -2147023395 0x800705DD No event log file could be opened, so the event logging service did not start. -2147023394 0x800705DE The event log file is full. -2147023393 0x800705DF The event log file has changed between reads. -2147023196 0x800706A4 The string binding is invalid. -2147023195 0x800706A5 The binding handle is not the correct type. -2147023194 0x800706A6 The binding handle is invalid. -2147023193 0x800706A7 The RPC protocol sequence is not supported. -2147023192 0x800706A8 The RPC protocol sequence is invalid. -2147023191 0x800706A9 The string universal unique identifier (UUID) is invalid. -2147023190 0x800706AA The endpoint format is invalid. -2147023189 0x800706AB The network address is invalid. -2147023188 0x800706AC No endpoint was found. -2147023187 0x800706AD The timeout value is invalid. -2147023186 0x800706AE The object universal unique identifier (UUID) was not found. -2147023185 0x800706AF The object universal unique identifier (UUID) has already been registered. -2147023184 0x800706B0 The type universal unique identifier (UUID) has already been registered. -2147023183 0x800706B1 The RPC server is already listening. -2147023182 0x800706B2 No protocol sequences have been registered. -2147023181 0x800706B3 The RPC server is not listening. -2147023180 0x800706B4 The manager type is unknown. -2147023179 0x800706B5 The interface is unknown. -2147023178 0x800706B6 There are no bindings. -2147023177 0x800706B7 There are no protocol sequences. -2147023176 0x800706B8 The endpoint cannot be created. -2147023175 0x800706B9 Not enough resources are available to complete this operation. -2147023174 0x800706BA The RPC server is unavailable. -2147023173 0x800706BB The RPC server is too busy to complete this operation. -2147023172 0x800706BC The network options are invalid. -2147023171 0x800706BD There is not a remote procedure call active in this thread. -2147023170 0x800706BE The remote procedure call failed. -2147023169 0x800706BF The remote procedure call failed and did not execute. -2147023168 0x800706C0 A remote procedure call (RPC) protocol error occurred. -2147023166 0x800706C2 The transfer syntax is not supported by the RPC server. -2147023164 0x800706C4 The universal unique identifier (UUID) type is not supported. -2147023163 0x800706C5 The tag is invalid. -2147023162 0x800706C6 The array bounds are invalid. -2147023161 0x800706C7 The binding does not contain an entry name. -2147023160 0x800706C8 The name syntax is invalid. -2147023159 0x800706C9 The name syntax is not supported. -2147023157 0x800706CB No network address is available to use to construct a universal unique identifier (UUID). -2147023156 0x800706CC The endpoint is a duplicate. -2147023155 0x800706CD The authentication type is unknown. -2147023154 0x800706CE The maximum number of calls is too small. -2147023153 0x800706CF The string is too long. -2147023152 0x800706D0 The RPC protocol sequence was not found. -2147023151 0x800706D1 The procedure number is out of range. -2147023150 0x800706D2 The binding does not contain any authentication information. -2147023149 0x800706D3 The authentication service is unknown. -2147023148 0x800706D4 The authentication level is unknown. -2147023147 0x800706D5 The security context is invalid. -2147023146 0x800706D6 The authorization service is unknown. -2147023145 0x800706D7 The entry is invalid. -2147023144 0x800706D8 The server endpoint cannot perform the operation. -2147023143 0x800706D9 There are no more endpoints available from the endpoint mapper. -2147023142 0x800706DA No interfaces have been exported. -2147023141 0x800706DB The entry name is incomplete. -2147023140 0x800706DC The version option is invalid. -2147023139 0x800706DD There are no more members. -2147023138 0x800706DE There is nothing to unexport. -2147023137 0x800706DF The interface was not found. -2147023136 0x800706E0 The entry already exists. -2147023135 0x800706E1 The entry is not found. -2147023134 0x800706E2 The name service is unavailable. -2147023133 0x800706E3 The network address family is invalid. -2147023132 0x800706E4 The requested operation is not supported. -2147023131 0x800706E5 No security context is available to allow impersonation. -2147023130 0x800706E6 An internal error occurred in a remote procedure call (RPC). -2147023129 0x800706E7 The RPC server attempted an integer division by zero. -2147023128 0x800706E8 An addressing error occurred in the RPC server. -2147023127 0x800706E9 A floating-point operation at the RPC server caused a division by zero. -2147023126 0x800706EA A floating-point underflow occurred at the RPC server. -2147023125 0x800706EB A floating-point overflow occurred at the RPC server. -2147023124 0x800706EC The list of RPC servers available for the binding of auto handles has been exhausted. -2147023123 0x800706ED Unable to open the character translation table file. -2147023122 0x800706EE The file containing the character translation table has fewer than 512 bytes. -2147023121 0x800706EF A null context handle was passed from the client to the host during a remote procedure call. -2147023119 0x800706F1 The context handle changed during a remote procedure call. -2147023118 0x800706F2 The binding handles passed to a remote procedure call do not match. -2147023117 0x800706F3 The stub is unable to get the remote procedure call handle. -2147023116 0x800706F4 A null reference pointer was passed to the stub. -2147023115 0x800706F5 The enumeration value is out of range. -2147023114 0x800706F6 The byte count is too small. -2147023113 0x800706F7 The stub received bad data. -2147023112 0x800706F8 The supplied user buffer is not valid for the requested operation. -2147023111 0x800706F9 The disk media is not recognized. It may not be formatted. -2147023110 0x800706FA The workstation does not have a trust secret. -2147023109 0x800706FB The SAM database on the Windows NT Server does not have a computer account for this workstation trust relationship. -2147023108 0x800706FC The trust relationship between the primary domain and the trusted domain failed. -2147023107 0x800706FD The trust relationship between this workstation and the primary domain failed. -2147023106 0x800706FE The network logon failed. -2147023105 0x800706FF A remote procedure call is already in progress for this thread. -2147023104 0x80070700 An attempt was made to logon, but the network logon service was not started. -2147023103 0x80070701 The user's account has expired. -2147023102 0x80070702 The redirector is in use and cannot be unloaded. -2147023101 0x80070703 The specified printer driver is already installed. -2147023100 0x80070704 The specified port is unknown. -2147023099 0x80070705 The printer driver is unknown. -2147023098 0x80070706 The print processor is unknown. -2147023097 0x80070707 The specified separator file is invalid. -2147023096 0x80070708 The specified priority is invalid. -2147023095 0x80070709 The printer name is invalid. -2147023094 0x8007070A The printer already exists. -2147023093 0x8007070B The printer command is invalid. -2147023092 0x8007070C The specified datatype is invalid. -2147023091 0x8007070D The Environment specified is invalid. -2147023090 0x8007070E There are no more bindings. -2147023089 0x8007070F The account used is an interdomain trust account. Use your global user account or local user account to access this server. -2147023088 0x80070710 The account used is a Computer Account. Use your global user account or local user account to access this server. -2147023087 0x80070711 The account used is an server trust account. Use your global user account or local user account to access this server. -2147023086 0x80070712 The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain. -2147023085 0x80070713 The server is in use and cannot be unloaded. -2147023084 0x80070714 The specified image file did not contain a resource section. -2147023083 0x80070715 The specified resource type can not be found in the image file. -2147023082 0x80070716 The specified resource name can not be found in the image file. -2147023081 0x80070717 The specified resource language ID cannot be found in the image file. -2147023080 0x80070718 Not enough quota is available to process this command. -2147023079 0x80070719 No interfaces have been registered. -2147023078 0x8007071A The server was altered while processing this call. -2147023077 0x8007071B The binding handle does not contain all required information. -2147023076 0x8007071C Communications failure. -2147023075 0x8007071D The requested authentication level is not supported. -2147023074 0x8007071E No principal name registered. -2147023073 0x8007071F The error specified is not a valid Windows NT RPC error code. -2147023072 0x80070720 A UUID that is valid only on this computer has been allocated. -2147023071 0x80070721 A security package specific error occurred. -2147023070 0x80070722 Thread is not cancelled. -2147023069 0x80070723 Invalid operation on the encoding/decoding handle. -2147023068 0x80070724 Incompatible version of the serializing package. -2147023067 0x80070725 Incompatible version of the RPC stub. -2147023066 0x80070726 The idl pipe object is invalid or corrupted. -2147023065 0x80070727 The operation is invalid for a given idl pipe object. -2147023064 0x80070728 The idl pipe version is not supported. -2147022998 0x8007076A The group member was not found. -2147022997 0x8007076B The endpoint mapper database could not be created. -2147022996 0x8007076C The object universal unique identifier (UUID) is the nil UUID. -2147022995 0x8007076D The specified time is invalid. -2147022994 0x8007076E The specified Form name is invalid. -2147022993 0x8007076F The specified Form size is invalid -2147022992 0x80070770 The specified Printer handle is already being waited on -2147022991 0x80070771 The specified Printer has been deleted -2147022990 0x80070772 The state of the Printer is invalid -2147022989 0x80070773 The user must change his password before he logs on the first time. -2147022988 0x80070774 Could not find the domain controller for this domain. -2147022987 0x80070775 The referenced account is currently locked out and may not be logged on to. -2147022986 0x80070776 The object exporter specified was not found. -2147022985 0x80070777 The object specified was not found. -2147022984 0x80070778 The object resolver set specified was not found. -2147022983 0x80070779 Some data remains to be sent in the request buffer. -2147022896 0x800707D0 The pixel format is invalid. -2147022895 0x800707D1 The specified driver is invalid. -2147022894 0x800707D2 The window style or class attribute is invalid for this operation. -2147022893 0x800707D3 The requested metafile operation is not supported. -2147022892 0x800707D4 The requested transformation operation is not supported. -2147022891 0x800707D5 The requested clipping operation is not supported. -2147022788 0x8007083C The network connection was made successfully but the user had to be prompted for a password other than the one originally specified. -2147022694 0x8007089A The specified username is invalid. -2147022646 0x800708CA This network connection does not exist. -2147022495 0x80070961 This network connection has files open or requests pending. -2147022494 0x80070962 Active connections still exist. -2147022492 0x80070964 The device is in use by an active process and cannot be disconnected. -2147021896 0x80070BB8 The specified print monitor is unknown. -2147021895 0x80070BB9 The specified printer driver is currently in use. -2147021894 0x80070BBA The spool file was not found. -2147021893 0x80070BBB A StartDocPrinter call was not issued. -2147021892 0x80070BBC An AddJob call was not issued. -2147021891 0x80070BBD The specified print processor has already been installed. -2147021890 0x80070BBE The specified print monitor has already been installed. -2147021889 0x80070BBF The specified print monitor does not have the required functions. -2147021888 0x80070BC0 The specified print monitor is currently in use. -2147021887 0x80070BC1 The requested operation is not allowed when there are jobs queued to the printer. -2147021886 0x80070BC2 The requested operation is successful. Changes will not be effective until the system is rebooted. -2147021885 0x80070BC3 The requested operation is successful. Changes will not be effective until the service is restarted. -2147020896 0x80070FA0 WINS encountered an error while processing the command. -2147020895 0x80070FA1 The local WINS can not be deleted. -2147020894 0x80070FA2 The importation from the file failed. -2147020893 0x80070FA3 The backup Failed. Was a full backup done before ? -2147020892 0x80070FA4 The backup Failed. Check the directory that you are backing the database to. -2147020891 0x80070FA5 The name does not exist in the WINS database. -2147020890 0x80070FA6 Replication with a non-configured partner is not allowed. -2147020796 0x80071004 The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. -2147019895 0x80071389 The cluster resource cannot be moved to another group because other resources are dependent on it. -2147019894 0x8007138A The cluster resource dependency cannot be found. -2147019893 0x8007138B The cluster resource cannot be made dependent on the specified resource because it is already dependent. -2147019892 0x8007138C The cluster resource is not online. -2147019891 0x8007138D A cluster node is not available for this operation. -2147019890 0x8007138E The cluster resource is not available. -2147019889 0x8007138F The cluster resource could not be found. -2147019888 0x80071390 The cluster is being shut down. -2147019887 0x80071391 A cluster node cannot be evicted from the cluster while it is online. -2147019886 0x80071392 The object already exists. -2147019885 0x80071393 The object is already in the list. -2147019884 0x80071394 The cluster group is not available for any new requests. -2147019883 0x80071395 The cluster group could not be found. -2147019882 0x80071396 The operation could not be completed because the cluster group is not online. -2147019881 0x80071397 The cluster node is not the owner of the resource. -2147019880 0x80071398 The cluster node is not the owner of the group. -2147019879 0x80071399 The cluster resource could not be created in the specified resource monitor. -2147019878 0x8007139A The cluster resource could not be brought online by the resource monitor. -2147019877 0x8007139B The operation could not be completed because the cluster resource is online. -2147019876 0x8007139C The cluster resource could not be deleted or brought offline because it is the quorum resource. -2147019875 0x8007139D The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. -2147019874 0x8007139E The cluster software is shutting down. -2147019873 0x8007139F The group or resource is not in the correct state to perform the requested operation. -2147019872 0x800713A0 The properties were stored but not all changes will take effect until the next time the resource is brought online. -2147019871 0x800713A1 The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. -2147019870 0x800713A2 The cluster resource could not be deleted since it is a core resource. -2147019869 0x800713A3 The quorum resource failed to come online. -2147019868 0x800713A4 The quorum log could not be created or mounted successfully. -2147019867 0x800713A5 The cluster log is corrupt. -2147019866 0x800713A6 The record could not be written to the cluster log since it exceeds the maximum size. -2147019865 0x800713A7 The cluster log exceeds its maximum size. -2147019864 0x800713A8 No checkpoint record was found in the cluster log. -2147019863 0x800713A9 The minimum required disk space needed for logging is not available. -2147018778 0x800717E6 The list of servers for this workgroup is not currently available -2146959359 0x80080001 Attempt to create a class object failed -2146959358 0x80080002 OLE service could not bind object -2146959357 0x80080003 RPC communication failed with OLE service -2146959356 0x80080004 Bad path to object -2146959355 0x80080005 Server execution failed -2146959354 0x80080006 OLE service could not communicate with the object server -2146959353 0x80080007 Moniker path could not be normalized -2146959352 0x80080008 Object server is stopping when OLE service contacts it -2146959351 0x80080009 An invalid root block pointer was specified -2146959344 0x80080010 An allocation chain contained an invalid link pointer -2146959343 0x80080011 The requested allocation size was too large -2146893823 0x80090001 Bad UID. -2146893822 0x80090002 Bad Hash. -2146893821 0x80090003 Bad Key. -2146893820 0x80090004 Bad Length. -2146893819 0x80090005 Bad Data. -2146893818 0x80090006 Invalid Signature. -2146893817 0x80090007 Bad Version of provider. -2146893816 0x80090008 Invalid algorithm specified. -2146893815 0x80090009 Invalid flags specified. -2146893814 0x8009000A Invalid type specified. -2146893813 0x8009000B Key not valid for use in specified state. -2146893812 0x8009000C Hash not valid for use in specified state. -2146893811 0x8009000D Key does not exist. -2146893810 0x8009000E Insufficient memory available for the operation. -2146893809 0x8009000F Object already exists. -2146893808 0x80090010 Access denied. -2146893807 0x80090011 Object was not found. -2146893806 0x80090012 Data already encrypted. -2146893805 0x80090013 Invalid provider specified. -2146893804 0x80090014 Invalid provider type specified. -2146893803 0x80090015 Provider's public key is invalid. -2146893802 0x80090016 Keyset does not exist -2146893801 0x80090017 Provider type not defined. -2146893800 0x80090018 Provider type as registered is invalid. -2146893799 0x80090019 The keyset is not defined. -2146893798 0x8009001A Keyset as registered is invalid. -2146893797 0x8009001B Provider type does not match registered value. -2146893796 0x8009001C The digital signature file is corrupt. -2146893795 0x8009001D Provider DLL failed to initialize correctly. -2146893794 0x8009001E Provider DLL could not be found. -2146893793 0x8009001F The Keyset parameter is invalid. -2146893792 0x80090020 An internal error occurred. -2146893791 0x80090021 A base error occurred. -2146889727 0x80091001 An error was encountered doing a cryptographic message operation. -2146889726 0x80091002 The cryptographic algorithm is unknown. -2146889725 0x80091003 The object identifier is badly formatted. -2146889724 0x80091004 The message type is invalid. -2146889723 0x80091005 The message is not encoded as expected. -2146889722 0x80091006 The message does not contain an expected authenticated attribute. -2146889721 0x80091007 The hash value is not correct. -2146889720 0x80091008 The index value is not valid. -2146889719 0x80091009 The message content has already been decrypted. -2146889718 0x8009100A The message content has not been decrypted yet. -2146889717 0x8009100B The enveloped-data message does not contain the specified recipient. -2146889716 0x8009100C The control type is not valid. -2146889715 0x8009100D The issuer and/or serial number are/is not valid. -2146889714 0x8009100E The original signer is not found. -2146889713 0x8009100F The message does not contain the requested attributes. -2146885631 0x80092001 The length specified for the output data was insufficient. -2146885630 0x80092002 An error was encountered while encoding or decoding. -2146885629 0x80092003 An error occurred while reading or writing to the file -2146885628 0x80092004 The object or property wasn't found -2146885627 0x80092005 The object or property already exists -2146885626 0x80092006 No provider was specified for the store or object -2146885625 0x80092007 The specified certificate is self signed. -2146885624 0x80092008 The previous certificate or CRL context was deleted. -2146885623 0x80092009 No match when trying to find the object. -2146885622 0x8009200A The type of the cryptographic message being decoded is different than what was expected. -2146885621 0x8009200B The certificate doesn't have a private key property -2146885620 0x8009200C No certificate was found having a private key property to use for decrypting. -2146885619 0x8009200D Either, not a cryptographic message or incorrectly formatted. -2146885618 0x8009200E The signed message doesn't have a signer for the specified signer index -2146885617 0x8009200F Final closure is pending until additional frees or closes. -2146885616 0x80092010 The certificate or signature has been revoked -2146885615 0x80092011 No Dll or exported function was found to verify revocation. -2146885614 0x80092012 The called function wasn't able to do a revocation check on the certificate or signature. -2146885613 0x80092013 Since the revocation server was offline, the called function wasn't able to complete the revocation check. -2146885600 0x80092020 The string contains a non-numeric character. -2146885599 0x80092021 The string contains a non-printable character. -2146885598 0x80092022 The string contains a character not in the 7 bit ASCII character set. -2146881536 0x80093000 OSS Certificate encode/decode error code base See asn1code.h for a definition of the OSS runtime errors. The OSS error values are offset by CRYPT_E_OSS_ERROR. ...total of 1823 error strings found in the system table resource...